Waters Alliance 2695 Separation Module With 2996 Photodiode Array Detector in Frederick, MD, USA
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Stock number
- 002719
- Weight
- 220 lbs
- Dimensions
- 50 × 50 × 70 in
- Operating temperature
- 4 to 40 C (39 to 104 F)
- Relative humidity
- 20 to 80%, noncondensing
- Acoustic noise
- ＜65 dB(A)
- Effective system delay volume
- ＜650 µL
- Plunger seal wash
- Integral, active, programmable
- Dry prime/wet prime
- Automatic, front panel control
- Maximum operating pressure
- 5000 psi (345 bar)
- Pressure ripple
- ≤2.5%
- Composition range
- 0.0 – 100.0 in 0.1% increments
- Composition accuracy
- ±0.5% absolute
- Composition precision
- ≤0.15% RSD or ≤0.02 min SD
- Flow precision
- ≤0.075% RSD or ≤0.02 min S
- D flow accuracy
- ±1% or 10 µL/min
- Wavelength range
- 190 to 800 nm
- Wavelength accuracy
- ±1 nm
- Maximum pressure
- 1000 psi, 68.9 bar
- Linearity range
- 5% at 2.0 AU, propylparaben, at 256 nm
- Spectral resolution
- 1.2 nm
- Baseline noise
- ±1.5 x 10^-5 AU peak-to-peak, dry, at 254 nm
- Category
- Chromatography in USA
- Subcategory
- Lab equipment
- Subcategory 2
- Analytical instruments
- Listing ID
- 74186519
Description
Waters Alliance 2695 Separation Module With 2996 Photodiode Array Detector
2695 Separations Module:
Power Requirements: 950 VA (maximum), 85 to 132 Vac or 180 to 250 Vac, 47 to 63 Hz
Flow Ramping Time: (0.01 to 30.00 min in 0.01-min increments) to reach maximum flow rate
2996 Photodiode Array Detector:
Drift: 1 x 10^-3 AU/hour at 254 nm (after warmup), ∆T ≤ 1 C per hour
Dimensions: 24 x 11.5 x 8.5 in
Electrical Requirements: Low trigger ＜ 1.8 V, High trigger ＞ 3.0 V, Protected to ±30 V, Minimum pulse width 20 msec, Maximum current 5 mA
Weight: 27 lbs.
rbb – R1 F3 P70
$6,900 USD