Sharp 1440F #8641 in Baltimore, MD, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Stock number
- 8641
- Swing over bed
- 14″
- Swing over cross slide
- 8 5/8″
- Swing over gap
- 20″
- Width of bed
- 8 1/2″
- Width of gap
- 9 1/4″
- Center height from top of compound
- 1 1/2″
- Distance between centers
- 40″
- Spindle nose type
- D1-4 Camlock
- Spindle bore
- 1 1/2″
- Spindle speeds
- 45 – 1,800 RPM
- Longitudinal feeds
- 0.0012″ – 0.0294″ /rev.
- Cross feeds
- 0.0003″ – 0.01″ /rev.
- Inch threads (40)
- 4 – 112 TPI
- Metric threads (22)
- 0.45 – 7.5mm
- Leadscrew pitch, diameter
- 8 TPI, 7/8″
- Saddle width
- 13 1/4″
- Apron width
- 11″
- Cross slide width
- 6 3/4″
- Cross slide travel
- 7″
- Compound rest travel
- 4″
- Compound width x length
- 3 1/2″ x 8 1/2″
- Bed length
- 66″
- Bed width
- 8 1/8″
- Quill travel
- 4 1/2″
- Quill diameter
- 1 3/4″
- Quill taper
- MT # 3
- Motor
- 3 HP / 220v, 440v / 3ph
- (includes
- machine manual, half nut wrench, wrench 17m, 19m, set of 6 allen wrenches, phillip screw driver, flat head screw driver, oil can, grease gun, rear way cover bracket, 2 set of dead center, pin for indicator, can of paint)
- Weight
- approx. 1,650 lbs.
- Category
- Lathes in USA
- Listing ID
- 37668411
Description
Sharp 14″ x 40″ Precision Lathe, 1440F
Inventory # 8641
D1-4 Camlock spindle, 1 1/2″ bore
Gap bed
Hardened and ground bedways
Larger compound, tailstock, and apron allow heavier cutting with less vibration than competitive models
16 speeds, all geared headstock housed inside a sturdy cast iron base
Jog button for eaasy gear engagement and inching spindle
Quick change gearbox offers a wide range of threads
3-Jaw 8″ Chuck
Steady Rest
Coolant System
16 Speeds
Full Length Splash Guard
4-Way Tool Post
6″ Diameter Back Plate
Tailstock
Back Plate
Foot Break
Threading Dial
Center Sleeve (MT #5)
Dead Centers (MT #3)
Tool Kit
Interested in this machine?
This seller has been contacted 3 times in the last week.