LR8432 Thermal Flow Data Logger in Beijing, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Specialized functions for thermal measurement
- ■Simple scaling setting: Direct input of the sensitivity of the heat flow sensor ■Calculation: Waveform calculations (simple average, moving average, accumulation, heat permeability) for convenient heat flow measurement, accumulation by numerical calculation, etc.
- Analog inputs
- [Number of channels] Analog 10ch swept frequency isolated input (2-pole M3 screw-fixed terminal block) [Voltage measurement range] ±10 mV～±60 V, 1-5V, maximum resolution 500 nV [Thermocouple measurement range] -200℃～1800℃ (depending on the sensor used), thermocouple (K, J, E, T, N, R, S, B), maximum resolution 0.1℃ [RTD] No [Humidity] function [Maximum input voltage] DC 60 V [Maximum voltage between channels] [Maximum rated voltage to ground] AC 30 Vrms, DC 60 V (applied between input channel and housing, upper limit voltage that will not damage channels)
- Pulse input
- [Number of channels] Pulse input 4 channels (dedicated connector for pulse input, common ground with the host) [Pulse accumulation] 0~1000M (count) (no-voltage a contact, open collector or voltage input), maximum resolution 1 (count) [Revolution change] 0~5000/n (rev/second), resolution 1/n (rev/second) ※n is based on the number of pulses per revolution 1~1000 [Maximum input voltage] DC 0~10 V [Maximum voltage between channels] [Maximum rated voltage to ground] Non-insulated
- Recording interval
- 10ms～1 hour, 19 settings (all input channels are scanned at high speed at each recording interval)
- Data filter
- OFF/50Hz/60Hz (automatically sets the cutoff frequency)
- Storage capacity
- Memory 3.5MW, CF card/U disk (only HIOKI original CF card is guaranteed to operate normally)
- External interface
- U disk: USB2.0 series mini B × 1, function: through computer control, transfer the data in the CF card to the computer (the data in the U disk cannot be transferred to the computer through USB communication) can copy the storage drive of CF card/U disk
- Display screen
- 4.3-inch WQVGA-TFT color LCD (480 × 272 dots)
- Functionality
- Real-time saving to CF card/U disk, numerical calculation, etc.
- Power supply
- [AC adapter] Z1005 (AC100~240V, 50/60Hz), maximum 30VA (including AC adapter), maximum 10VA (main unit only) [Battery pack] 9780/continuous use time: 2.5h (reference value at 25℃), maximum 3VA [External power supply] DC10~16V, maximum 10VA (please consult for connection cable, wiring less than 3m)
- Volume and weight
- 176W × 101H × 41Dmm, 550g (without battery pack 9780)
- Category
- Sensors in China
- Subcategory
- Data collector
- Subcategory 2
- Electronic equipment
- Subcategory 3
- Recorders and collectors
- Listing ID
- 104133656
Description
Introduction:
Suitable for evaluation of thermal insulation performance and analysis of causes of temperature changes. The measured data is recorded in a USB flash drive and can be easily stored in a PC and taken away! For long-term measurements, a more reliable CF card can be used for recording.
Suitable for evaluation of thermal insulation performance and analysis of causes of temperature changes
Product features:
●Use heat flow sensor to measure heat and flow direction
●Temperature and voltage can also be measured
●Measurement data is recorded in a USB flash drive and can be easily stored in a PC and taken away! For long-term measurements, a more reliable CF card can be used for recording
●Analog input 10ch insulation
●All channels have a maximum sampling rate of 10ms
●Strong anti-interference performance
●Easy to carry compact body, widescreen high-definition LCD screen
Technical parameters: