GEA Process membrane nanofiltration unit up to 6.25 m³/h - filter in Barneveld, Gelderland, Netherlands
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Serial number
- VF751204374
- Stock number
- LX003
- Check
- Filters > Miscellaneous filters
- Material
- Stainless steel
- Filter
- check
- Extra specifications
- GEA membrane nanofiltration unit up to 6.25 m³/h, in very good condition and hardly used. This unit was only used for two validation batches and then stored. The complete original manufacturer's documentation is included in digital format. It includes the operating manual, process flow diagrams, circuit diagrams, certificates, test reports and other relevant technical documentation.Spiral membranes.The system is designed to process a maximum volume of approx. 100 m³ of product (feed) per day. An average feed flow rate of approx. 4 to 6 m³/h in operating mode “16/4” or “20/4” is assumed (explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If the daily treatment capacity needs to be increased at a later date or the installed membrane area is no longer sufficient due to unforeseeable fouling effects, two empty spaces are provided for retrofitting additional membrane housings. The piping and the recirculation pump are already prepared for such an extension. The nanofiltration system is designed for a semi-automatic cleaning-in-place (CIP) process. The system contains the necessary valves for the internal circulation of cleaning solutions and subsequent system rinsing. Specifications- Feed volume: 400 - 500 m³/week- Feed volume: 80 - 100 m³/day- Feed volume: 4.0 - 6.25 m³/h- Production time: 16 - 20 h/day- Operating temperature: 35 to max. 65 °C Power consumption:- Power supply (pumps): 3 x 400 V, 50 Hz- Installed power: approx. 65 kWCitjneo9S- Electrical power consumption: 53.1 kW/h- Compressed air: 6 bar, oil- and water-free- Steam: 6 bar (max.)- Sealing water: approx. 75 - 150 l/h- CIP water: approx. 19 m³/h- CIP water per cycle: 6 m³/CIP- Steam consumption per cycle: 100 kg/CIP- CIP chemicals: (e.g. membrane cleaner, acid, alkali, preservative, biocide) Limit values- Max. Max. operating temperature: 65 °C- Max. Max. operating pressure: 30 bar- pH range for feed water:- Maximum: pH 10.0- Minimum: pH 2.0 Cleaning in place (CIP)- Max. Temperature: 85 °C- Max. Pressure: 10 bar- pH limits (for up to 30 minutes):- Maximum: pH 10.5 - Minimum: pH 2.0
- Or “20/4” is assumed (explanation
- “20/4” corresponds to 20 hours of filtration
- Volume
- 4.0 - 6.25 m³/h
- Production time
- 16 - 20 h/day
- Temperature
- 85 °C
- Supply (pumps)
- 3 x 400 V,
- Power
- approx. 65 kW
- Electrical power consumption
- 53.1 kW/h
- Compressed air
- 6 bar,
- - steam
- 6
- Water
- approx. 19 m³/h
- Per cycle
- 6 m³/CIP
- Consumption per cycle
- 100 kg/CIP
- Chemicals
- (e.g. membrane cleaner,
- Operating temperature
- 65 °C
- Operating pressure
- 30 bar
- Pressure
- 10 bar
- Subcategory
- Filters
- Subcategory 2
- Filters filters
- Listing ID
- 103615936
Description
General
SKU
LX003
Location
Barneveld
Make
Gea Process
No.
VF-75-12-04374
Main Features
Material
Stainless steel
Specified Features - Miscellaneous filter
Material
Stainless steel
Filter
check
Information
Extra Specifications
GEA
membrane nanofiltration unit up to 6.25 m³/h,
in very good condition and hardly
used. This unit was only used for two validation batches and then stored.
The
complete original manufacturer's documentation is included in digital format.
It includes the operating manual,
process flow diagrams,
circuit diagrams,
certificates,
test reports and other relevant technical documentation.
Spiral membranes.
The system
is designed to process a maximum volume of approx. 100 m³ of product (feed) per
day. An average feed flow rate of approx. 4 to 6 m³/h in operating mode “16/4”
operation / 4 hours of CIP cleaning).
If the
daily treatment capacity needs to be increased at a later date or the installed
membrane area is no longer sufficient due to unforeseeable fouling effects,
Services offered by seller
This seller offers new machines
This Seller offers rental services
This Seller offers repair & maintenance services
This seller offers spare parts
This seller offers transport & logistics
This seller can help you plan & execute entire projects
This seller offers on-site assembly and disassembly