NEW 14" x 40" SHARP MODEL 1440F PRECISION ENGINE LATHE in Bannockburn, IL, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Stock number
- 14577
- Swing over bed
- 14"
- Swing over cross slide
- 8 5/8"
- Swing over gap
- 20"
- Width of bed
- 8 1/2 "
- Distance between centers
- 40"
- Spindle nose type
- D1-4 cam lock
- Spindle bore
- 1 1/2"
- Spindle speeds
- 45 - 1,800 rpm [16] / 30-2200 rpm [variable]
- Taper of spindle bore
- MT #5
- Longitudinal feeds - in / rev [40]
- 0.0012 - 0.029"
- Cross feed - in /rev [40]
- 0.0003 - 0.01"
- Inch threads [tpi]
- 4 - 112 (40)
- Metric threads [mm]
- 0.45 - 7.5mm
- Lead screw (pitch, diameter)
- 8 tpi, 7/8"
- Saddle width
- 13-1/4"
- Apron width
- 11"
- Cross slide width
- 6-3/4"
- Cross slide travel
- 7"
- Compound rest travel
- 4"
- Compound width x length
- 3-1/2 x 8-1/2"
- Bed length
- 66"
- Bed width
- 8 1/2"
- Quill travel (graduated)
- 4 1/2"
- Quill diameter
- 1 3/4"
- Quill taper
- MT #3
- Spindle motor
- 3 HP
- Motor electric phase
- 3 phase/single or 3 phase
- Net weight (approx.)
- 1,650 LBS
- Category
- Lathes in USA
- Subcategory
- Lathes, engine
- Listing ID
- 103436191
Description
NEW 14" x 40" SHARP MODEL 1440F PRECISION ENGINE LATHE
Hardened and ground gears in headstock for long lasting wear.
Induction hardened and ground bed ways for smooth longitudinal movements.
Spindle supported by 2 high precision tapered roller bearings.
Carriage equipped with overload clutch to protect gears and screws.
Quick change totally enclosed gearbox offers wide range of threads.
Oil bath lube system keeps gears and shafts well lubricated.
Oversized compound, apron and cross slide offer better cutting stability compare with similar size models available in F and V models.
Jog button for easy engagement of gears and inching of spindle rotation.
Digital Variable Speed in VS and V models allow easy change of spindle speed by dialing, it also operates on 3 phase or single phase power supply.
Gapped bed allow large work piece to be chucked when needed.
Swing over bed
14"
Swing over cross slide
8 5/8"
Swing over gap
20"
Width of bed
8 1/2 "
Distance between centers
40"
HEADSTOCK