IC695ALG600-DD | General Electric Analog Input module in Fujian, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Dimensions
- 3.5 cm x 13.5 cm x 13.5 cm
- Weight
- 0.24 kg
- Mfr. part number
- IC695ALG600-DD
- Series
- PACSystem RX3i
- Part number
- IC695ALG600
- Configurable input filter
- 8 Hz, 12 Hz, 16 Hz, 40 Hz, 200 Hz, 1000 Hz
- Input signals, resistance
- 0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 Ohms
- Internal power
- 3.3V: 350mA; 5V: 400 mA
- Rtd inputs
- PT 385 / 3916, N 618 / 672, NiFe 518, CU 426
- Power dissapation
- 5.4W max
- Thermocouple inputs
- B, C, E, J, K, N, R, S, T
- Field status led
- Yes
- Module conversion method
- Sigma-delta
- Terminal block led
- Yes
- Module resolution
- 11-16 Bits
- Ok led
- Yes
- Operating temperature
- 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
- Storage temperature
- -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
- Humidity
- 5 to 95%, non-condensing
- Category
- Input/Output Modules in China
- Subcategory
- Plc
- Subcategory 2
- Control system components
- Listing ID
- 101734448
Description
General Electric IC695ALG600-DD Analog Input module
General Electric IC695ALG600-DD Analog Input module The IC695ALG600 comes with Two (2) groups of Four (4) channels each and configurable to any combination on input signals.
The IC695ALG600 comes with Two (2) groups of Four (4) channels each and configurable to any combination on input signals. It supports 0–20 mA, 4–20 mA, +/-20 mA current signals; +50mV, +150 mV, 0–5 V, 1–5 V, 0–10 V, +10V voltage signals; 0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 Ohms resistance signals; PT 385 / 3916, N 618 / 672, NiFe 518, CU 426 RTD sensors; B, C, E, J, K, N, R, S, T Thermocouple inputs. The IC695ALG600 is installed to an RX3i universal backplane and requires at least version 2.80 firmware version or later. This module is configured using the Proficy Machine Edition (PME) version 5.0 SP1A LD-PLC Hotfix 1 or later.