1771-IVN/C | 32 Point Digital Input Module in Fujian, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Dimensions
- 3.2 cm x 14.5 cm x 25.5 cm
- Weight
- 0.38 kg
- Mfr. part number
- 1771-IVN/C
- Part number/catalog no.
- 1771-IVN
- Module type
- Digital DC Input Module
- Number of inputs
- 32 Inputs (4 Sets of 8)
- Voltage category
- 10-60 Volts DC, Source (Sink Load)
- Dc operating voltage
- 10-30 Volts
- Backplane current
- 280 Milliamperes
- Max dc off-state current
- 1.7 Miliamperes
- Typical dc signal delay (on)
- 6 (+/- 2) ms (Digital Filter)
- Typical dc signal delay (off)
- 50 ms
- Wiring arm
- 1771-WH
- Model status
- Earlier Model
- Typical ac signal delay (off)
- 45 (+/- 15) ms
- Category
- Input/Output Modules in China
- Subcategory
- Plc
- Subcategory 2
- Control system components
- Listing ID
- 101730211
Description
1771-IVN/C 32 Point Digital Input Module
1771-IVN/C 32 Point Digital Input Module The 1771-IVN module is an input module from the PLC 5 series which can be used as a key component in a PLC 5 control system
The 1771-IVN module is an input module from the PLC 5 series which can be used as a key component in a PLC 5 control system. It is compatible with all the current chassis from the Bulletin 1771 product line. The 1771-IVN input module supports half-slot addressing without any restrictions and 1-slot addressing under the right conditions, but it cannot support 2-slot addressing. It uses 32 input image bits in the data table but no output image bits. The 1771-IVN input module comes with sourcing inputs and it is meant to be used with sinking outputs. The 1771-IVN is a PLC 5 Digital DC Input Module. It converts DC signals provided by user devices to the logic level needed by the processor. It directly controls the state of corresponding bits in the PLC data table.