2018 Farm King Backsaver Auger 1370 in Wetaskiwin, Alberta, Canada
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Year
- 2018
- Model name
- Backsaver Auger
- Trim name
- 1370
- Generic type (primary)
- General
- Pto power, rated engine speed
- Tractor requirements min PTO hp (with 540 RPM PTO): 80 hp
- Drive system
- Swing auger: Two internal gearboxes (PTO driven), sprocket and chain
- Wheels
- Track: 12' | Hubs: 15" with 6 bolt automotive type hubs and bearings
- Hydraulic pump
- approx. requirements for lift: 1200 PSI
- Dimensions
- Forward Reach Lowest: 36' 11" / half way: 33' / highest: 27' 5" | Size: 13" x 70' | Tubing: 12 gauge | Undercarriage: 70' - 3-1/2" x 3-1/2" x 3/16" square tube; 85' and 95' - 4" x 4" x 1/4" square tube | Lift arms: 1/4" formed tubing upper, 7 gauge lower | Bridging: 1/2" cable | Hopper dimensions: 43-1/2" x 60"
- Height
- Lowest: 13' 7" / Half way: 31' 9" / Highest: 50'
- Flighting thickness
- (Measured from centre of flighting strip): 1/4" flighting in swing-away and main auger | Shaft: 11 gauge, 3" diameter
- Hopper height
- Standard from ground: 16-3/4" at heel end, 16-1/4" at other end | Multi-flighting from ground: 12-3/4" at both ends
- Hitch weight capacity
- 1140 lb
- Weight
- 5,175 lb
- Subcategory
- Auger
- Subcategory 2
- General
- Listing ID
- 100300467
Description
2018 Farm King Backsaver Auger 1370
THE FARM KING BACKSAVER AUGER IS DESIGNED BY THE PEOPLE WHO KNOW AND UNDERSTAND YOUR GRAIN HANDLING NEEDS.
Farm King has been manufacturing BackSaver augers for more than four decades. The same principles used back then still apply today when choosing materials that go into every auger, grade A steel and functional design. Models range in lengths of 50 to 114 feet accompanied by 10, 13 and 16-inch tube sizes. A bridge-like support system allows the auger tubing and flighting to remain stable at all times including raising and lower of the auger. The hydraulic scissor lift resurrects the auger in virtually no time at all. When the spout is in the desired location, a safety hydraulic ball valve can be adjusted to ensure the augers stays when and where you want even in unpredictable weather. The recommended horsepower for peak operation ranges from 40-175 depending on auger size.
$25,900 USD