Used Processing in Washington, USA

Duro Dyne RH Mach 70 Rolling Head Automatic Pinspotter

• Manufacturer: Duro Dyne

The Platinum Edition RH Mach 70 Pinspotter features a more efficient transformer that provides a wider range of welding capabilities. The Heavy Duty Vibrator Bowl and base weld pins up to 2’’, and the optional ma...

Duro Dyne PBF-510

• Manufacturer: Duro Dyne

Duro Dyne PBF 510 Pinspotter Duro Dyne is proud to introduce the next generation of portable insulation fastening equipment. Built upon the highly successful PBF pinspotter concept, the PBF-510 delivers more powe...

(3) x 1,500g Variable Capacity Tanks | CHP1

Price Is Per Tank Dimensions: 72"D x 10'H | Ground clearance: 30" | Doors: Rectangle bottom door 17.5"W x 21.5"H, Oval racking door 18"W x 14"H | Racking port: 2" | Drain port: 2" | Sample valve: Yes | Thermowell...

Johnson 121-SD Gas Furnace 120,00 BTU

• Manufacturer: Johnson

Johnson 121-SD Gas Furnace 120,00 BTU Unknown working condition. Sold as is. No further information is available beyond what can be derived from the listing or pictures. *Fork lift available on site at pick-up. P...

Ameri-Cure Heated Paint Booth

• Manufacturer: Ameri-Cure
• Phase type: Three-phase

Ameri-Cure Heated Paint Booth 10 HP motor Gas-fired heating Lighted interior Fire suppression system Drive-in double door Personnel door Control panel

U14643C Namcor Striker HDX square to round machine

• Manufacturer: Namcor

ITEM: 14643C MODEL: HDX LOCATION: Kent WA. All you need is shop air to quicky make square to round transitions.

Roper Whitney #544

• Manufacturer: Roper Whitney

This piece is located in Kent, WA, just south of Seattle. We can ship all over North America and beyond. Used #13619

RAMS RAMS-2004

• Manufacturer: Rams

Capacity: 24 gauge Dimensions: 9″ x 9″ x 31″ Weight: ~70 lbs MODEL : RAMS-2004 A manually operated tool that forms uniform drive cleat edges on rectangular ductwork in seconds without setup or adjustment. The upp...

RAMS NRAM2004

• Manufacturer: Rams

Rams 2005 cheek bender MODEL : RAMS-2005 This 24 inch machine is bench mounted with Torrington Needle bearings as well as a roller guide end plate. This will give a consistent bend all along the length of the pie...

U14293 Engel Powered Cleat Bender

• Manufacturer: Engel

This piece is located in Kent, WA, just south of Seattle. We can ship all over North America and beyond. Used #U14293 Powered Cleat Bender Great Condition Forms a modified tear drop hem on 36 inches of 20 gauge. ...

U14314 Cleat Bender 24″

This piece is located in Kent, WA, just south of Seattle. We can ship all over North America and beyond. Used #U14314 24″ Cleat Bender Excellent Condition

Drucker Diagnostics Model 642E Horizontal Centrifuge

• Manufacturer: Drucker Diagnostics
• Power requirement: 0.172 kilowatt

Drucker Diagnostics Model 642E Horizontal Centrifuge Model 642E Horizontal Centrifuge The Model 642E is the world’s best selling horizontal clinical centrifuge. The simple “one-button” operation assures repeatabl...

Drucker Diagnostics Model DASH Apex 12 Horizontal Centrifuge

• Manufacturer: Drucker Diagnostics

Drucker Diagnostics Model DASH Apex 12 Horizontal Centrifuge Model DASH Apex 12 Horizontal Centrifuge The DASH Apex 12 comes with 3 easily selectable pre-set cycles (default or custom) conveniently labeled for yo...

5’ wide x 12’ long Portable SULTA Heavy Duty Pugmill Mixer

(1) – one – Portable SULTA 5’ wide x 12’ long Heavy Duty Pugmill Mixer, continuous mix design rated at 250 to 850 tons per hour; steel tub with liners; 7” square twin shafts with bolt on paddle bases and 9” long ...

Waterwise 7000 Series 8 Gallon Water Distiller

• Manufacturer: Waterwise

Waterwise 7000 Series 8 Gallon Water Distiller. Condition is New. Shipped with UPS Ground.