Used Processing in Utrecht, Netherlands

N.N. Belt conveyor

• Manufacturer: N.N.

Belt conveyor. Horizontal. Motor: 0,23 kW - 2821 rpm. Effective belt lxw: 90 x 18 cm. Total dimensions: 95 x 40 x 30 cm.

2005 Sacome TFMI

• Manufacturer: Sacome

Skid mounted tubular heat exchanger set assembled by Het Stempel. Unit exist of: #01: (Multitube, type: 1x1-TFMI-370-1-6 1/2''/19-6000-316L/2205-HARD, year: 2005, 37 tubes in 1 tube. Length 6 meter. Product side:...

Ytron Agitator

• Manufacturer: Ytron

Agitator with rotor-stator principle mixer. Shaft length: 280 mm. Propellor diameter: 50 mm. Height adjustable 60 - 370 mm above base plate. Inlet for liquids around the shaft. Speed control in several steps. Tot...

1999 APV Gaulin 200-3P

• Manufacturer: APV - Gaulin

APV Gaulin 200-3P homogenizer. 2 Stage, hydraulic pressure control. 6 Pistons, piston Ø 60 mm. Current motor power: 200 kW and maximum pressure in current confirguration with this motor 210 bar. Two sides product...

1990 Rannie BT 50.79H

• Manufacturer: BT

Parts of a Rannie BT 50.79H homogenizer. Frame + Motor (55 kW - 743 rpm - 105 A - 50 Hz - 415 V) + side plates and rooftop + Crankshaft + eccentric rings + 2 stage head + 3x connecting rods + 3x crossheads + 3-pa...

8-Head dosing head

8x head filling nozzles (2x4) for tuft dosage with pneumatic valves, was mounted on a 4 line filler. (ampack) as predoser.

Wolfking TRP

• Manufacturer: Wolfking

Belt conveyor with stainless steel frame. Belt width: 450 mm. Belt lenght: 3250 mm. Angle approx. 15 degree up, turnable mounted on a frame. Total dimensions: 3300 mm x 700 mm x 1300 mm.

1995 Tetra Pak Spiraflow TTF-38s/16c-3-1

• Manufacturer: Tetra Pak
• Model: TTF38

Monotube, outer diameter 38 mm (smouth) and inner diameter 16 mm (coagurated). 6 Tubes of 3 meter. Product side: pressure up to 60 bar - temperature up to 160 °C - volume: 1 liter per tube, total volume 6x 1 = 6 ...

N.N. Belt conveyor

• Manufacturer: N.N.

Belt conveyor. Effective Belt lxw: 455 x 10 cm. Motor: 0.25 KW, 1300/127 rpm. Horizontal. Total dimensions: 460 x 30 x 35 cm.

Plate heat exchanger

Plate heat exchanger, not sanitary. 1 section with 19 plates. 4 in-/outlets of 22 mm. Total dimensions 40 x 25 x 50 cm.

Alfa Laval DD500EC - Spec

• Manufacturer: Alfa-Laval

Vacuum dearation unit , max capacity is 5,000 liter/hour depends on viscosity of product and temperature. Tank volume 200 liter. Special design with infeed from top. SMS connections. Complete single jacketed. Tot...

1975 Benhil 8529

• Manufacturer: Benhil
• Model: 8529

Benhil 8529 Packer for 250 gr. Parcels butter parcels per 40 x 250 gr. Is 10 Kg. Per carton, semi automatic.

2004 Alfa Laval Spiraflo 1x2 VLM 4x18/63-60-316L/304D

• Manufacturer: Alfa-Laval

Alfa Laval Spiraflo 1x2 VLM 4x18/63-6.0-316L/304D 2 tubular spiraflow pipes. Length pipe: 5,70 mtr. Total: 6,15 mtr. Heat transfer area: 1,29 m2 per pipe

Transport Conveyor 1,65 mtr.

• Manufacturer: Transport Conveyor

Conveyor 1.65 mtr. Transport conveyor. Length: 1,65 mtr.; Width: 0,43 mtr.

2003 Transport Conveyor 0,75 mtr.

• Manufacturer: Transport Conveyor

Transport conveyor 0,75 mtr. Transport conveyor, Length: 0,75 mtr, Width: 0,095 mtr. Motor: 0,18 kW - 1320 Rpm