Processing » Hiroshima

Building Filters

604

Used Processing in Hiroshima, Japan

1988 Nishimura Electric Corporation SM-560
- used
- Manufacturer: Nishimura Electric
7.4kw, 2.2m3/min Air volume: 2.2m3/min Static pressure: 5900/7400mmAq
Hiroshima, Japan
1989 Hachiozo Manufacturing Co. CF-115-BVL
- used
- Manufacturer: Hachiozo Seisakusho
3.7kw4p220v Air volume: 65m3/min Air pressure: 150mmAq Rotation speed: 1730rpm
Hiroshima, Japan
Zao Sangyo Scrub Mate Mini 360B
- used
- Manufacturer: Zao Sangyo
Power: 250 W | Quantity saved: One
Hiroshima, Japan
Toyohiko Kogyo TP63-B5-D
- used
- Manufacturer: Toyohiko Kogyo
Discharge pressure: 14 Mpa (MAX) Discharge rate: 5 to 26 L / min Oil tank: 63L Oil pump: HPP-VB2V-F8A5 With oil cooler
Hiroshima, Japan
2000 Yasunaga YN 5039
- used
- Manufacturer: Yasunaga
Volume generated: 99.9% purity, 0.55 mPa 3.4 Nm3/h Operating hours: 11930.8 hours, compressor (scroll 2.2kw) built-in Complete books and instruction manuals available
Hiroshima, Japan
［Mitsubishi] Geared motor 3.7kw4p200V
- used
- Manufacturer: Mitsubishi
Unused 3.7kw4p reduction ratio 1/3 Power: 3.7kw4p200V | Quantity saved: One
Hiroshima, Japan
［Hitachi] Motor 30kw 4p200V
- used
- Manufacturer: Hitachi
Unused General-purpose motors Power: 30kw4p200V | Quantity saved: One
Hiroshima, Japan
［Yaskawa Electric Corporation] General-purpose motors
- used
- Manufacturer: Yaskawa - Motoman
Power: 22Kw4P200V | Material: SS | Quantity saved: 1
Hiroshima, Japan
Sumitomo CHHM3-6160DC-AV-121
- used
- Manufacturer: Sumitomo
2.2kw/4P/200V Deceleration ratio: 1/121 Power: 2.2kw/4P/200V | Material: SS | Quantity saved: 1
Hiroshima, Japan
Motor with cyclo reducer
- used
- Manufacturer: Daiichi Bussan Co.
Reduction ratio: 1/273 Shaft diameter φ120 Power: 11Kw (1800rpm) 200V
Hiroshima, Japan
Mitsubishi XE-NE
- used
- Manufacturer: Mitsubishi
0.4kw/200V d2G4, unused Power: 0.4kw | Quantity saved: 1
Hiroshima, Japan
1992 Tanabe CO-24
- used
- Manufacturer: Made by Tanabe
24-inch type, top discharge type, with manual brake
Kure, Japan
2010 G-TECH 1456/3 type
- used
- Manufacturer: G-TECH
Centrifugal effect: 3150G Left speed rotation: 4-48rpm Acceleration time: 2-3min Wetted parts: SUS316 Wear-resistant with 2 pumps. The product is made in Australia, but we provide full support. No operation panel
Kure, Japan
Hata Ironworks HU-RG
- used
- Manufacturer: Hata Ironworks
Main electric motor 0.75㎾ Built-in motor with stepless speed change Main unit weight: approx. 180 kg This is a dry type granulator that crushes tablets and other solids to make them into dependable granules. This...
Kure, Japan
1985 Matsumoto Kikai MARK III 48×36
- used
- Manufacturer: Matsumoto Machinery
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan

Show More Results