Used tester in Shanghai, China

Crack Depth/Width Tester for Concrete

• Manufacturer: Testech Group

Application F51 Concrete Crevice Depth Tester is mainly used to test crevice depth and sound wave propagation velocity in concrete according to sound wave diffraction propagation principle. It is an intelligent I...

SUG255 Impulse Withstand Voltage Tester

Impulse Voltage Generators | Impulse Generators | Impulse Withstand Voltage Tester |High Voltage Surge Generator is according to IEC255-5, GB-14711 GB/T-14598.3 IS-13252-1 , IEC60060, IEC60065 GBT17215.301 and GB...

WDT-1 Wire Damaged Tester

• Manufacturer: Lisun

WDT-1 Wire Strength Damaged Tester is designed and manufactured according to corresponding regulation in standard IEC 60884-1:2022 Clause 12.2.5 and Figure 11 (GB/T 2099.1-2021 Clause 12.2.5 and Figure 11), IEC 6...

WS-1 Temperature Rise Tester

• Manufacturer: Lisun

The WS-1 Temperature Rise Tester fully complies with the requirements of IEC 60884-1:2022 Clause 19 (GB/T 2099.1-2021 Clause 19), IEC 60669-1:2017 Clause 17 (GB 16915.1-2024 Clasue 17) and IEC 60998-1:2002 Clause...

Semi-automatic Bevel Gear Tester

View: 24 | 1: 20 | Max. diameter of work piece: 10:1 | 11: φ350 mm | Main spindle center to driven box spindle nose: 130-270 mm | Spindle taper bigger end dia: φ80 mm | Spindle taper length: 120 mm | Taper: 1:20...

Sealing Tester HY-MFY-01

(Fully automatic, touch screen, including printing, support GMP, built-in vacuum pump) It is suitable for the sealing test of products. Through the test, the sealing process and sealing performance of flexible pa...

Sealing Tester HY-MFY-02

(Fully automatic, touch screen, including printing, support GMP, built-in vacuum pump) It is suitable for the sealing test of products. Through the test, the sealing process and sealing performance of flexible pa...

LS2090 LED Power Driver Tester

LS2090 LED Power Driver Test Instrument is the comprehensive test instrument for LED driver power which is according to GB/T 24825 -2009 and IEC 62384 :2006. It can measure the following parameters: input (AC&DC)...

Vibratron II - Vibration Sensitivity Tester

• Manufacturer: Thunderscience (Shanghai)

lightweight, sturdy equipment The Vibratron II consists of a small controller and two separate vibrating rods. Vibration amplitude, which is continuously adjustable, is displayed on the front panel. Vibration amp...

Normal Temperature Oil Fatty Acid Set Point Tester

• Manufacturer: Shanghai Jiahang Instruments

Normal Temperature Oil Fatty Acid Set Point Tester The manufacture of this JH-0713 Normal Temperature Oil Fatty Acid Set Point Tester complies with the requirements stipulated in the China Entry-Exit Inspection a...

Low Temperature Oil Fatty Acid Freezing Point Tester

• Manufacturer: Shanghai Jiahang Instruments

Low Temperature Oil Fatty Acid Freezing Point Tester The manufacture of this JH-0713A Low Temperature Oil Fatty Acid Freezing Point Tester complies with the requirements stipulated in the China Entry-Exit Inspect...

LCD Display Transformer Oil Viscosity Tester

This tester is designed and manufactured specially according to the national standard " GB265 - 88 Determination of kinematic viscosity of petroleum products " . It's suitable to determine kinematic viscosity of ...

Package Tightness Tester HY-LT-01

Package Tightness Tester HY-LT-01 is professionally suitable for the airtightness test of ampoules, vials, pre-filled, co-extruded film infusion bags and other injection products, rigid container packaging and so...

Cleveland Open Cup Flash Point Tester

• Manufacturer: Shanghai Shengxian Instrument Equipements

Purpose The instrument is designed and made as per the National Standard of People’ Republic of China GB/T3536-2008 "Test Methods for Flash and Fire Point of Petroleum Products (Cleveland Open Cup Methods)", and ...

SW-6 Power Cord Bending Tester

• Manufacturer: Lisun

The SW-6 Power Cord Flexibility Bending Tester is according to IEC 60884-1: 2022 Clause 23.4 and Figure 28 (GB/T 2099.1-2021 Clause 23.4), IEC 60745-1: 2008 Clause 24.12 and Figure 9 (GB 3883.1-2014 Clause 24.12)...