Used pasteurizer

Pasteurizer 250 GAL

250 Gallon, 304 stainless steel, mixing tank and heat exchange system. Vessel dimensions: 42" diameter with a 42" straight wall, dome top and slant bottom with (1) 3½" OD / 3" ID tri-clamp discharge with 18" grou...

2015 KHS Pasteurizer

• Manufacturer: KHS

Setup for Juice, 50 Gallons/Minute, Incoming Product Temperature 65ºF minimum – incoming product temperature max is 85ºF, Target Hold Time 15 seconds, 460 Volts, 3PH, 60HZ, Water 40 PSIG, Air 80 PSIG, Steam PSIG,...

GC Evans Pasteurizer

• Manufacturer: Evans

There are three basic models of the GC Evans Pasteurizer. All GC Evans Sales Pasteurizers are designed to require the minimum of mechanical maintenance. All key components are accessible and easily replaced. GC E...

APV Pasteurizer SR2-R-14

• Manufacturer: APV - Gaulin

Pasteurizing system with a 30 Gallon, stainless steel, tank and heat exchange system. Vessel dimensions: 25½" diameter with a 17" straight wall, dome top and slant bottom. Equipped with a 7½ HP Ampco centrifugal ...

Pro Engineering / Manufactorin Pasteurizer Tunnel 15030FA

• Manufacturer: Pro Engineering / Manufactorin

Pro Engineering, Model Slim / Line 15030-FA is (2) tier, stainless steel, belt POUCH tunnel pasteurizer with (3) zones for pasteurizing, warming and cooling with amount of product per hour – depending on material...

4 USED UHT/HTST PASTEURIZERS WE HAVE FOR SALE

MICROTHERMICS UHT/HTST LAB 25 DIPW DIRECT STEAM PASTEURIZATION SYSTEM MICROTHERMICS UHT/HTST LAB ELECTRIC 25DH PASTEURIZER REBUILT HTST TUBULAR PASTEURIZER - 2016 GOODNATURE FPXT-264 HTST FLASH PASTEURIZER

Pasteurizer, Tube-in-Tube, 1.5" x 2.5" x 24', 14-Pass, Stainless Steel, Feldmeier - #4687244

• Manufacturer: Feldmeier

Feldmeier tube-in-tube pasteurizer, 14-pass tube set. Tubes measure 1-1/2" ID x 2-1/2" OD x 24' long. Unused and constructed from stainless steel.

Pavan PV-HE150/18

• Manufacturer: Pavan

2013 PAVAN PV-HE150/18 PASTEURIZER. With Pavan Pre-Dryer Model 150 is designed to be placed after the pasteurizer to dry the product with hot air, with a customizable percentage of humidity. The Pre-Dryer is cons...

APV 75 HP

• Manufacturer: APV - Gaulin

Used APV pasteurizer on unitized base. Equipped with APV plate heat exchanger, sanitary centrifugal pumps, retention tube, balance tank, high pressure pump, APV jacketed Liquifier, jacket rated 75 psi @ 350°F; 75...

2004 Feldmeier Tube in Tube

• Manufacturer: Feldmeier

Feldmeier tube in tube pasteurizer/heat exchanger, 22 Feet long x 5 feet wide, Last heated product to 190ºF, Hold time of 25 seconds at 150 Gallons/Minute with extended holding tubes, heat extraction hood, Balanc...

Mobius Packaging PT8579

• Manufacturer: Mobius Packaging

14 Week Lead Time Required Stainless Steel Construction Frame Setup for 350 Cans/Minute 470 Square Feet of Processing Area Single Heat Exchanger for Controlling all the Processing Zones Built new and never instal...

Pasteurizer, HTST, Tube-In-Tube, CIP, Vacuum Separator, #5674433

HTST Pasteurization System, previously operated at 20 GPM for 70 brix apple concentrate. Include pasteurizer skid, stainless sanitary process parts and in-line valve controllers, featuring a 7-pass holding tube (...

Pasteurizer, Retention Coil Only, 316 S/st, 5', 6 Pass #S736072

Retention Coil for Pasteurizer, 316 Stainless Steel - Includes 3" diameter x 5' long tubes configured as a 6-pass system. Previously used for holding tubes in a pasteurizing application.

Pasteurizer, Bottle, Cooler, 42" X 11', Draper Belt #C733753

• Manufacturer: Shibuya

Pasteurizer, measuring 42" x 11' long, 3-zone, manufactured by Shibuya, Model PC-11027. Includes draper belt, plastic interlocking belt, provisions for feed & discharge conveyor, conveyor drives, piping, etc. New...