Used Materials Testing in Germany

+GF+ - GEORG FISCHER PCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PRP
- Manufacturer: Georg Fischer
Standard test cylinder production by vibratory pressing, pressing pressure 1 kp/cm²
Meinerzhagen, Germany
Adjustment body stair step: 4 steps; 10 - 40 mm; 25 x 30 mm
- Manufacturer: Unknown
Adjusting body step 10 - 40 mm; Step size: 25 mm x 30 mm Steps: 10 / 20 / 30 / 40 (in mm); Material: X20
Münster, Germany
Adjustment body stair step: 6 steps; 3 - 25 mm; 20 x 20 mm
- Manufacturer: Unknown
Adjusting body step 3 - 25 mm ; Step size: 20 mm x 20 mm Steps: 3 / 5 / 10 / 15 / 20 / 25 ( in mm ); Material: aluminum
Münster, Germany
BPK 6-AL- 50-25-10 mm
- Manufacturer: Unknown
Image quality test specimen according to EN 462-1; 6 AL in the lengths: 10mm / 25 mm / 50 mm
Münster, Germany
BPK 10-FE- 50-25-10 mm
- Manufacturer: Unknown
Image quality test specimen according to EN 462-1; 10 FE in the lengths: 10mm / 25 mm / 50 mm
Münster, Germany
BPK 13-AL- 50-25-10 mm
- Manufacturer: Unknown
Image quality test specimen according to EN 462-1; 13 AL in the lengths: 10mm / 25 mm / 50 mm
Münster, Germany
BPK 10-TI- 50-25- mm
- Manufacturer: Unknown
Image quality test body according to EN 462-1, 10 TI in the lengths: 10 mm / 25 mm / 50 mm
Münster, Germany
BNIF plates
Product information "BNIF plates" Comparison plates for testing surface roughness in accordance with EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case
$1,478 USD
Münster, Germany
Adjustment body stair step: 8 steps; 1 - 10 mm; Width: 20mm
- Manufacturer: Unknown
Adjustment body stair step 1 - 10 mm; Step size: 20 mm x 20 mm with certificate in aluminum box steps: 1/2/3/4/5/6/8/10 (in mm); Material: 1.1147
Münster, Germany
SIUI CTS 30 C
- Manufacturer: Unknown
SIUI CTS 30 C wall thickness measuring device SIUI CTS 30 C for the vest pocket or wrist Test device with the nominal wall thickness through the coating (different modes can be set) Scope of delivery: - Wall thic...
$1,190 USD
Münster, Germany
Scrata plates - 48 pieces -
- Manufacturer: Unknown
Scrata plates (set: 48 pieces) comparison plates for testing surface quality according to DIN EN 1370 The set consists of the following: - Surface rougness (1-5) - Surface inclusions (1-5) - Gas porosity (1-5) - ...
$3,557 USD
Münster, Germany
Scrata plates - 48 pieces -
Product information "Scrata plates - 48 pieces -" Comparison plates for testing surface quality in accordance with DIN EN 1370 The set is composed as follows:- Surface roughness (1-5) - Surface inclusions (1-5) -...
$4,606 USD
Münster, Germany
portable hardness tester novotest T-UD3
Product information "portable hardness tester novotest T-UD3" portable hardness tester novotest T-UD3 with a probe (optional UCI or Leeb) 1kgf (9.8N),, 5kgf (49N), 10kgf (98N) Leeb probe types D, DC, DL, C, D...
$3,430 USD
Münster, Germany