Used Machine Tools in Germany

Milling fixtures 2 pieces by Inovex - SK50 different versions 16965

• Manufacturer: Inovex

tool holder, milling holder, milling tool -various designs -drill chuck, surface chuck, reducing bushes, cutter head, end mill, spindle tool -suitable for tool changer -with CNC tightening bolt

Plastic sheets transparent of plastic - 3000x2000x2 mm 24639

• Manufacturer: Kunststoff

Polycarbonate, Plexiglas, acrylic glass, acrylic glass -the sheets are covered with protective film on both sides -the sheets can be cut with guillotine shears -the sheets are flexible but not suitable for bendin...

Thread cutting chuck 2 pieces from – MK2 33753

Tapping chuck, tapping attachment, tapping chuck, tapping attachment

Tapping chuck M64 from WMW - GB5 17506

• Manufacturer: WMW

Tapping chucks, threaded chucks, tapping chucks -Delivery in as-is condition as inspected -Tapping chucks without collets -with slip clutch

Reamer holder from PGH Metall – 50 60 19 Ø 20 mm Ø 35 mm 33668

• Manufacturer: PGH Metall

Slip-on holder, reamer, tool holder, machine reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing bushes, slip-on holder

Screw clamp by Richa - span 500 mm 22130

• Manufacturer: Richa

C-shape screw clamp, screw clamps, steel construction clamps, clamps, clamping tools

Rubber sealing profile 3 pieces of – 50 x 55 mm 27116

Rubber sealing profile, sealing plate, curing tool, seal, edge protection, solid rubber rectangular profile

Adjusting ring by TURNUS - Ø 104 mm 22685

• Manufacturer: TURNUS

Clamping clamps, pointed file clamps, hand file clamps, screw clamps, steel construction clamps, clamps, clamping tools

Screw clamp from Holex Hoffmann - 250 x 120 mm 32874

• Manufacturer: Hoffmann

C-shaped screw clamp, Screw clamps, Steel construction clamps, Clamps, Clamping tools, Malleable cast iron screw clamp

W802 Machine tools

Diamond profile dressing roll UNICORN VAN MOPPES DIABLOC 20437207/1 2138 X606844 New !

W798 Machine tools

Diamond profile dressing roll NORTON 104392266 X600191 2117 Bolt circle diameter: Ø 75 mm, 8x bore: Ø 6.5 / 10 mm New !

Bushings by Hasco - Various sizes 9932

• Manufacturer: Hasco

Drill bushes 10x type: Z10W/36/14 | 9x type: Z10W/36/9 | Mass: 5 | Internal storage: 111105

Indexable insert milling cutter from Hoffmann - KRE80-321 16368

• Manufacturer: Hoffmann

Shell end mill, indexable insert milling cutter, hedgehog milling cutter, tool holder, milling holder, milling tool

Bushings half shell by Federal Mogul - AL 16065 (John Deere) 10333

• Manufacturer: John Deere

Bearing bushes, half shell, drill bush Number: 6x AL 16065 ( John Deere ) | Mass: 3 | Internal storage: 145706

Clip-on holder 2 pieces of – MK4 length 380 mm 33739

Clip-on holder, standard holder and accessories, SASSEX twist drill bit, Sassex twist drill bit, reamer, Sassex reamer, Sassex holder, tool holder, holder for drill bit, twist drill bit