Used Machine Tools in Bavaria, Germany

Trusted Seller
GILLARDON GB30V 60-1600
- Manufacturer: GILLARDON
- Throat depth: 320 mm
- Drilling diameter: 32 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Bore capacity in steel (diameter): 32mm | Short spindle: MK 3 | Bore depth: 175mm | Spindle throat: 320mm | ...
Günzburg, Germany
Trusted Seller
ALZMETALL Alzstar 30/S
- Manufacturer: Alzmetall
- Model: ALZSTAR 30S
- Throat depth: 293 mm
- Drilling diameter: 25 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Bore capacity in steel st 60: 25mm | Bore capacity in cast iron gg 20: 30mm | Drilling capacity in st 60: 30...
Günzburg, Germany
Trusted Seller
ALZMETALL AX 3/S
- Manufacturer: Alzmetall
- Model: AX3
- Throat depth: 293 mm
- Drilling diameter: 32 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Bore capacity in steel st 60: 32mm | Bore capacity in cast iron gg 20: 38mm | Drilling capacity in st 60: 40...
Günzburg, Germany
Trusted Seller
FLOTT SB M2 ST
- Manufacturer: Flott
- Model: SB M2 ST
- Throat depth: 240 mm
- Drilling diameter: 18 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Bore capacity in steel (diameter): 18 / 23mm | Bore depth: 100mm | Throat: 240mm | Spindle speed: 250 - 4000...
Günzburg, Germany
Trusted Seller
ALZMETALL AX 3/SV
- Manufacturer: Alzmetall
- Model: AX3
- Throat depth: 293 mm
- Drilling diameter: 32 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Spindle turning speed - stepless: 160-2,250rpm | Spindle stroke: 120mm | Throat: 293mm | Column diameter: 11...
Günzburg, Germany
Trusted Seller
Auction
MIYANO - BNC-42CS - 2004 - CNC lathe with bar feeder FMB turbo
- Manufacturer: Miyano
- Model: BNC42
- Spindle bore: 42 mm
MIYANO - BNC-42CS - 2004 - CNC lathe with bar feeder FMB turbo
Möttingen, Germany
Visit Auction Website
Trusted Seller
Auction
INDEX V200 CNC Vertical Lathe with Siemens 840C Control
- Manufacturer: Siemens
With Collet Chuck. Maximum Spindle Speed 2,500rpm. With Gang Tooling. S/No.100588 2004).
Schweinfurt, Germany
Visit Auction Website
1999 Wuko installation machine
- Manufacturer: Wuko
Used and well-maintained Wuko double-sided erector with cross shear (without meter counter), machine with red motor, The machine has been professionally repaired, inspected, and cleaned and is fully functional....
Hohenbrunn, Germany
1985 Wuko installation machine
- Manufacturer: Wuko
Used double-sided Wuko standing seam roofing machine, 230 V, strip width approx. 250–1000 mm, seam height up to max. 60 mm, weight approx. 95 kg, with cross-cut and longitudinal shears (without meter counter), ma...
Hohenbrunn, Germany
Thread cutting machine Ridgid 535
- Manufacturer: Ridgid
Used Ridgid 535 threading machine Accessories: 1 set of 1/2" - 3/4" dies 1 set of 1" - 2" dies Manual cutting head Machine untested, in its current condition, i.e., we will not overhaul the machine!
Hohenbrunn, Germany
Trusted Seller
Auction
2015 Hydraulic press brake, CNC-controlled, 3200 kN, TRUMPF TruBend 5320, Year
- Manufacturer: Trumpf
- Model: TruBend 5320
Lot consisting of 1 used hydraulic CNC press brake in very good condition. Machine is equipped with powerful hydraulic drive, touchscreen CNC control, and comes with a complete tooling package. Model: TRUMPF TruB...
Gersthofen, Germany
Visit Auction Website
Trusted Seller
Auction
2018 Schmid SE 349 2 Vertical Drilling Tapping Machine with Siemens 840D Control
- Manufacturer: Siemens
Note: Images are for reference only. The machine is a new 2018 model and remains unused in its original shipping crates in offsite storage. Photos shown are of the same model for illustration purposes only. With ...
Schweinfurt, Germany
Visit Auction Website
1978 Schlebach Piccolo folding machine
- Manufacturer: Schlebach
Used Schlebach folding machine, in a wooden crate. Machine is sold as is, with age-related wear and tear, without functionality testing.
Hohenbrunn, Germany
Auction
2007 GILDEMEISTER CTX 420 linear CNC lathe
- Manufacturer: Gildemeister
- Model: CTX 420
Processing hours 7034 h
Wassertrüdingen, Germany
Visit Auction Website
Trusted Seller
Auction
Profiroll Bad Düben Urwa 120S Cold Ring Rolling Machine With Rotec VME Max Control
- Manufacturer: Rotec
Maximum Working Ø120mm. S/No. 0047 (1995).
Schweinfurt, Germany
Visit Auction Website