Used Foundry & Casting in Germany

2017 ABP LFR 30

• Manufacturer: ABP

Furnace body holding cap. 45 t gross / 30 t net Mainly consists of: Furnace body with inductor and tilting chair with hydr. cylinder Hydraulic unit with control desk Three-phase-oil-stepdown-transformer 1250 kVA,...

1994 ABP ITK 4000

• Manufacturer: ABP

Mainly consists of: MF-Crucible furnace with tilting chair, hydraulic cylinder without furnace cover GS choke 11.2 mH: 1050A NEW Year: 2014 GS choke 11.2 mH: 1050A Used Year: 1994 DS oil transformer 1,600kVA/10kV...

1990 DISA 2070 A

• Manufacturer: DISA

Mould thickness 200 – 650 mm Mainly consists of: Moulding Machine (DMM – 5,9 Mil. original moulds produced only until now) SSU PMC 14 m SBC 12 m Cyclone Electric cabinet without Coresetter! Still assembled, as ...

No-Bake Shake out

The Shakeout deck is manufactured from 70 mm thick mild steel with D050 mm apertures covered by 20 mm thick Hardox 400 D=40 mm Mainly consists of: Shake-out grid with steel frame Counter-vibration mass (2 pieces)...

2007 WEBAC ZUFS 200x2750

• Manufacturer: Webac

Mainly consists of: Unpacking group Regeneration group A Regeneration group B knock-out grates (2 pcs.) Concrete Counter-vibrating mass (2 pcs.) Funnels (2 pcs.) Vibratory conveyor troughs (4 pieces) Upper belt m...

1998 Eirich RV23 VAC

• Manufacturer: Eirich

Mainly consists of: Sand Mixer Also: Sand Cooler Molding Sand Centrifuge Bucket Elevator (Dürrmeier) Various Belt Conveyors Storage Discharge Conveyor (FM) Used and New Sand Silos Tank Scale Molding Material Test...

2020 MAUS s.r.l. Italien SAM 300G

• Manufacturer: Maus

Mainly consists of: Complete Grinding cell Automatic Pallet Changer Part Measuring Laser System The machine is NEW and was not in operation. Including 12 months guarantee Ex-works

2015 EURO-EQUIP AP 900-50

• Manufacturer: EURO-EQUIP

Mainly consists of: Main body of the crusher Hydraulic unit Electric cabinet Hopper – inkl. Protection and support structure Skip loader and its support structure Vibrating conveyor 900 x 3500 mm As seen, ex work...

2004 HWS / Eirich HSP 1

• Manufacturer: Eirich

Sand Mixer capacity of 500 kg Mainly consists of: Seiatsu HSP1 Moulding Machine: Moulding size: 650 x 500 x 200/200 mm / 35 moulds per hour Flask manipulator – Flask conversion equipment – Silos – Lubrication Pne...

2014 FAT Cold resin molding system semi-automatic without Mixer 20 t/h used for sale

• Manufacturer: F.A.T.

Mainly consists of: Heating cooling unit marke FAT without Furan sand mixer 20 t/h double joint Radius: 1,750 mm + 3,500 = total 5,250mm 29 pcs. roller conveyors Vibration table 2 pcs. belt conveyors Cranes: 2 cr...

2007 Küttner Shake-out 7 x 6,5 m, 75 t with complete Sand Regeneration Plant 15 t/h (no Bake) used for sale

• Manufacturer: Küttner

Mainly consists of: 2 pcs. Shake-out, dim. 3500 x 6500 mm; max. weights of 45 t = combined a large shake-out, dim.7000 x 6500 mm; max weights 75 t. 1 pc. Additional emptying station (3,5×6 m) for the separ...

Roeperwerk H80

• Manufacturer: Laempe / Röperwerk

Mainly consists of: Core shooter H80 Roller conveyor for core box without housing Electrical control panel modernised with new Siemens S7 PLC controls and Visual display Lüber amine gasing device Typ LW- FDA 1640...

ASEA / ABB LRI 5

• Manufacturer: Asea

Technical data: – frequency: 50 Hz – rated voltage: 530 V – rated current: 1720 A – nominal temperature: 1500°C

2000 LAEMPE core-producing center LLKFZ 10

• Manufacturer: Laempe / Röperwerk

casting volume 10 l, core box max. 700x 350/695 x 480 mm, vacuum clamping device, filling funnel, enclosure, PLC control with LAEMPE operator guidance, gassing device, sand mixer SM7 1.5, binder dosing, steel fra...

RÖPER / LAEMPE LKV H 12

• Manufacturer: Laempe / Röperwerk

Single-station machine, shooting volume 12 L, core box max. 400 x 600 x 355 mm, manual table height adjustment, vacuum clamping device, filling funnel with external vibrator, electrical control with LAEMPE operat...