Used Foundry & Casting in Germany

1999 DISA 2110 MK3

• Manufacturer: DISA

Mainly consists of: DISAMATIC Model 2110 Mk3 Allen Bradley PLC Upgraded VDU Automatic Core Setter Automatic Spray System 12 Meter AMC Technical Data: Mold Dimensions: Production Capacity:

2015 EURO-EQUIP AP 900-50

• Manufacturer: EURO-EQUIP

Mainly consists of: Main body of the crusher Hydraulic unit Electric cabinet Hopper – inkl. Protection and support structure Skip loader and its support structure Vibrating conveyor 900 x 3500 mm As seen, ex work...

2004 HWS / Eirich HSP 1

• Manufacturer: Eirich

Sand Mixer capacity of 500 kg Mainly consists of: Seiatsu HSP1 Moulding Machine: Moulding size: 650 x 500 x 200/200 mm / 35 moulds per hour Flask manipulator – Flask conversion equipment – Silos – Lubrication Pne...

2014 FAT Cold resin molding system semi-automatic without Mixer 20 t/h used for sale

• Manufacturer: F.A.T.

Mainly consists of: Heating cooling unit marke FAT without Furan sand mixer 20 t/h double joint Radius: 1,750 mm + 3,500 = total 5,250mm 29 pcs. roller conveyors Vibration table 2 pcs. belt conveyors Cranes: 2 cr...

2007 Küttner Shake-out 7 x 6,5 m, 75 t with complete Sand Regeneration Plant 15 t/h (no Bake) used for sale

• Manufacturer: Küttner

Mainly consists of: 2 pcs. Shake-out, dim. 3500 x 6500 mm; max. weights of 45 t = combined a large shake-out, dim.7000 x 6500 mm; max weights 75 t. 1 pc. Additional emptying station (3,5×6 m) for the separ...

Roeperwerk H80

• Manufacturer: Laempe / Röperwerk

Mainly consists of: Core shooter H80 Roller conveyor for core box without housing Electrical control panel modernised with new Siemens S7 PLC controls and Visual display Lüber amine gasing device Typ LW- FDA 1640...

ASEA / ABB LRI 5

• Manufacturer: Asea

Technical data: – frequency: 50 Hz – rated voltage: 530 V – rated current: 1720 A – nominal temperature: 1500°C

1994 ABP ITK 4000

• Manufacturer: ABP

Mainly consists of: MF-Crucible furnace with tilting chair, hydraulic cylinder without furnace cover GS choke 11.2 mH: 1050A NEW Year: 2014 GS choke 11.2 mH: 1050A Used Year: 1994 DS oil transformer 1,600kVA/10kV...

1990 DISA 2070 A

• Manufacturer: DISA

Mould thickness 200 – 650 mm Mainly consists of: Moulding Machine (DMM – 5,9 Mil. original moulds produced only until now) SSU PMC 14 m SBC 12 m Cyclone Electric cabinet without Coresetter! Still assembled, as ...

No-Bake Shake out

The Shakeout deck is manufactured from 70 mm thick mild steel with D050 mm apertures covered by 20 mm thick Hardox 400 D=40 mm Mainly consists of: Shake-out grid with steel frame Counter-vibration mass (2 pieces)...

2007 WEBAC ZUFS 200x2750

• Manufacturer: Webac

Mainly consists of: Unpacking group Regeneration group A Regeneration group B knock-out grates (2 pcs.) Concrete Counter-vibrating mass (2 pcs.) Funnels (2 pcs.) Vibratory conveyor troughs (4 pieces) Upper belt m...

2000 LAEMPE core-producing center LLKFZ 10

• Manufacturer: Laempe / Röperwerk

casting volume 10 l, core box max. 700x 350/695 x 480 mm, vacuum clamping device, filling funnel, enclosure, PLC control with LAEMPE operator guidance, gassing device, sand mixer SM7 1.5, binder dosing, steel fra...

RÖPER / LAEMPE LKV H 12

• Manufacturer: Laempe / Röperwerk

Single-station machine, shooting volume 12 L, core box max. 400 x 600 x 355 mm, manual table height adjustment, vacuum clamping device, filling funnel with external vibrator, electrical control with LAEMPE operat...

1993 VOGEL & SCHEMMANN KSM 6.05.00 CO2/CB/VAC/hy. Prop./SPS-99/Unterdr.

• Manufacturer: Vogel

Four-column machine, 5 l shooting volume, horizontal/vertical core box division, hydraulic table height adjustment, vacuum clamping device, vibrating infeed chute, safety enclosure, electrical PLC control with tw...

VOGEL & SCHEMMANN MISCHKA II

• Manufacturer: Vogel

Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 7.5 kW, connected loads 380 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...