Used Processing in Utrecht, Netherlands

1997 Miromatic vorlaufbehälter VB400/175

• Manufacturer: Miromatic

Vertical tank. Nominal volume: 175 liter. Pressure in tank 5 bar. Conical bottom. Product outlet: 3'' flange. Outlet height: 50 cm. Connections for: PT-100 temperature sensor, high and low level sensor. 1 CIP sp...

2004 D/S P320

Mix tank mobile. Propellor agitator. Motor: 0.37 kW - 2800 rpm - n2: 280 rpm. Member. Spray bowls. Outfeed pump (KSB). Total dimensions: 90 x 90 x 180 cm.

N.N. Belt conveyor

• Manufacturer: N.N.

Transport conveyor with control panel - Belt length 225cm / width 44cm / height 95cm.

N.N. Belt conveyor

• Manufacturer: N.N.

Transport conveyor - Motor 0,12kW 350rpm - Total dimensions 105 x 40 x 70cm.

N.N. Butteroil clarifixator

• Manufacturer: N.N.

Inverter to change the water / fatt phase (Clarifixator) which you use when you make butteroil out of cream (instead of using a homogeniser). High speed centrifugal mixer with impellor with pins. The pins split t...

Carry up conveyor

Carry up conveyor. Engine 0.12kW - 0.6A - 1375 / gearbox 17rpm - Total dimensions 180 x 100 x 250cm. Total weight 130kg.

Transport conveyor

Transport conveyor, length belt 300 cm, width belt 35 cm.

Transport conveyor

Transport conveyor: Belt length 180 cm/ width 24 cm/ height 102 cm - 2x Motor 0.20kW, 0.55A, 1380rpm N2=276 2x 0.37kW, 1.0A, 1350rpm - Total dimensions 2192 x 90 x 145cm.

Agitator/mixer

Agitator / mixer with milling disc. Length of the shaft: 137 cm, diameter shaft: 30 mm, diameter disc 25 cm, flange diameter 35 cm. Vem motor: 50 Hz - 4,0 kW - 400 / 690 V - 5,1 A - 1440 rpm. Total dimensions: 19...

Agitator/mixer

Pin agitator / mixer. Length of the shaft: 130 cm, diameter shaft: 30 mm, length pin: 26 cm, flange diameter: 35 cm. Vem motor: 50 Hz - 4,0 kW - 400 / 690 V - 5,1 A - 1440 rpm. Total dimensions: 175 x 80 x 30 cm....

Double-mouth dosing device

2000 Avery 350R

• Manufacturer: Avery - Berkel

Labeling machine, power: 6.3 Amp - 540 W - 230 V - 50 Hz

Insulated Tube Heat Exchanger

Insulated tube heat exchanger, Monotube, 13tubes of 6mtr long, surface ±: 4.9m2 total surface, dimensions total unit 6.200 mm x 400 mm x 1.300 mm, 6bar, 150°C max,

K.D. Pneumatik SD4n

• Manufacturer: K.D. Pneumatik

180 mbar - 0,95 kW - 2730 rpm - 50 Hz - 400 V - 2,3 A. Total dimensions: 59 x 36 x 40 cm.

Separator MRPX318 / 418

Only base frame of MRPX318 or 418 separator incomplete, for parts only.