Used Processing in Ontario, Canada

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

Tank Mixer

-Sew-Eurodrive Motor: -1760/244 RPM -460V -with shaft and two mixer heads

Refrigerant heat exchanger CB30-24

• Manufacturer: Alfa lava

-Shipping dimensions: Height 4" x Width 4 1/2" x Length 12 1/2" -Type: CB30-24 -Manufacturing date: 2012 08 15

Immersion mixer blender

-Weg Motor: 575V, 3phase, - explosion proof - 1740 RPM, 5.0 HP, 5.60 AMPS -40" shaft

Twister T4 Trimmer

• Manufacturer: Twister

-Dimensions: 25" length x 15" width x 16.5" height -115 V -2A current draw -Blade motor: 200W/0.25 HP -Tumbler Motor: 6w/1/125 HP -5 inch discharge -speed control

Plastic Storage Tank c/w SS Containment

4' dia x 7' high plastic tank 5' x 6 1/2' x 32" deep SS containment tank c/w Prominant metering pump LAST USE: ACID STORAGE/WATER TREATMENT 3 IN STOCK

Littleford mixer fm-130-d

• Manufacturer: Littleford

-Shipping measurements: 50” x width x 66” length x 72” height -Model: fm-130-d -Explosion-proof electric motor (x2): 10 HP, 130/460 volts, 24.4/12.2AMPS, 1770 RPM -Siemens motor: 20HP, 48/24 AMPS, 3520 RPM, 230/4...

Air Dryer

• Manufacturer: Dvair

Model: U031-281TT serial#: 13053589933-12 -Max GPD: 24 -PSI: 80 -50/60 HZ -1.40 A -tested on Dec 12/ 22, works great

13,724 Liter Steel jacket on stainless steal tank

-Insulated -On legs -Dome bottom and top -Manhole top -3019 IMP

Riemelt SS Rotory Sifter

• Manufacturer: Riemelt

Model -Type RS 7E, Serial - 866 0160, 5 hp, 575 volt, VFD ready, pressure rated to 14.5 psi, total length - 79", total height to hopper bottom - 57", total diameter - 24", SS feed, auger & beater bars, poly sifti...

Emb papst blower fan

-Model number is R3G630 -21.5" opening -fan dimensions 31.5" wide x 17" deep x 31.5" tall -From a compressor cooler rad

Riemelt SS Rotory Sifter

• Manufacturer: Riemelt

Model - Type RS 7E, Serial - 866 0160, 5 hp, 575 volt, VFD ready, pressure rated to 14.5 psi, total length - 79", total height to hopper bottom - 57", total diameter - 24", SS feed, auger & beater bars, poly sift...

Republic HRC400 Reciprocating Blower

• Manufacturer: Republic

-Shipping dimensions: 20” length x 13” width x 15” height -3 HP -220/380 V -EN60034 3-Moor