- Trusted Seller
2005 MITSUBISHI 650MMGW-110
- Manufacturer: Mitsubishi
Screw dia: 90mm | Shot volume: 3140cm3 | Distance between tie rods: 1050x1050 | Mould thickness: 450x950 | Daylight opening: 1800mm
Chiba, Japan - Trusted Seller
2016 denyo dca-25lske
- Manufacturer: Denyo
- Model: DCA-25LSKE
Hours: 5650H | Specification: 20.0/25.0KVA. ENGINE: V2403
Chiba, Japan - Trusted Seller
2015 NISSEI FNX140Ⅲ-36A
- Manufacturer: Nissei
Screw dia: 50mm | Shot volume: 353cm3 | Distance between tie rods: 510x510
Chiba, Japan - Trusted Seller
1996 TADANO LS-106A
- Manufacturer: ���������
We accept repainting. Please feel free to contact us if you have a request for replacement or repair of this machine or parts.
Chiba, Japan - Trusted Seller
2021 Hitachi Industrial Equipment Systems ST-230C
- Manufacturer: Hitachi
- Model: ST-230C
Machine specification ○ Capacity Capacity 230L Pressure 1.02MPa Receiver tank of standing type. Comment from sales representative The tank was used in an indoor research facility. Manufactured in 2021.
Tokyo, Japan - Trusted Seller
2021 Hitachi Industrial Equipment Systems SRL-11DMNA5
- Manufacturer: Hitachi
- Model: SRL-11
Machine Specifications Low noise scroll type oil-free dryer built-in package type ○ Configuration Main unit SRL-5.5CB Dryer HDP-110A ○ Capacity Output 5.5x2 kW 3-phase 50Hz Maximum pressure 0.8MPa Blowing volume ...
Tokyo, Japan - Trusted Seller
2000 Tank unit for Nissin Koki NVG750TH
- Manufacturer: Nichinjoh Koki
Machine Specifications ○ Unit set contents 1) Mag Separator (2) Small tank (3) Centrifuge (4) Coolant tank (4 sets) Details of each part of the unit (1) Mag separator Magnetic separator made by Noritake F-120 typ...
$1,865 USDTokyo, Japan - Trusted Seller
2010 Nagano Science LH 21 - 12 M
- Manufacturer: Nagano
Machine Specifications Power supply AC200V (within 190 to 220V) 3φ 50/60Hz Maximum load current (main breaker) 18.5A (30A) Operating ambient temperature range +5°C to +35°C Temperature/Humidity Range Temperature/...
Tokyo, Japan 
Tsukuba, Japan
$509 USDTsukuba, Japan
$1,695 USDTsukuba, Japan
Caterpillar 389mm Height Condenser Coil: PN 552-8372; 高さ389mm のコンデンサーのコイル
- Manufacturer: Caterpillar
Part no: 552-8372
$576 USDTsukuba, JapanCyto centrifuge made in 1993
- Manufacturer: サイトウ遠心機
200V No operation panel Where to use: Chemical factory Food factory Feed and fertilizer factory Water treatment plant | Processing power: 3m3 / h | Rotation speed: 7300rpm | Power: 5.5kw | Material: Wetted parts ...
Kure, Japan
Tsukuba, Japan
plastic injection machine
- Manufacturer: Sumitomo
two unit electric plastic injectionmachine . JSW 20 ELIII . And Sumitomo Se30D . Please attached photos
Japan
Mitsubishi SJ 6000 Centrifugal Separator
- Manufacturer: Mitsubishi
- Model: SJ 6000
Good condition Mitsubishi SJ 6000 Centrifugal Separators manufactured in 2010. Located in Japan and other countries. Click request price for more information.
Japan
Tip: Enter manufacturer, model or keyword
