Test, Lab, Medical equipment » Lasers & Light Sources » Bavaria

Search By Manufacturer

Building Filters

29

Used controllers/interfaces in Bavaria, Germany

  • TOPTICA DLC pro: Digital Control

    TOPTICA DLC pro: Digital Control

    • Manufacturer: Toptica

    Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...

    Munich, Germany
  • TOPTICA DLC pro: Digital Control

    TOPTICA DLC pro: Digital Control

    • Manufacturer: Toptica

    Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...

    Munich, Germany
  • TOPTICA TOPO smart

    TOPTICA TOPO smart

    • Manufacturer: Toptica

    Probe molecular vibrations, economically Optimized for spectroscopy from 2600 - 3500 nm Narrow linewidth and fine tuning across O-H, N-H, C-H vibrations Hands-free, digital control The TOPO smart is a continuous-...

    Munich, Germany
  • TOPTICA Mid Infrared Tunable Laser

    TOPTICA Mid Infrared Tunable Laser

    • Manufacturer: Toptica

    1.43 - 4.2 µm (2400 - 7000 cm-1) Narrow linewidth: 2 MHz (1·10-4 cm-1) Hands-free motorized tuning 300 GHz (10 cm-1) mode-hop-free tuning range Easy all-digital DLC pro control Mid-infrared tunable lasers between...

    Munich, Germany
  • TOPTICA FemtoFErb 1950

    TOPTICA FemtoFErb 1950

    • Manufacturer: Toptica

    Frequency shifted Er-doped fiber laser Short pulse emission < 100 fs @ 1950 nm Alignment-free all-fiber setup, use of PM fibers only SAM mode-locking technology Compact design: optics and electronics just in one ...

    Munich, Germany
  • TOPTICA FemtoFiber smart 780

    TOPTICA FemtoFiber smart 780

    • Manufacturer: Toptica

    Up to 140 mW avg. power with typ. 85 fs pulses Alignment-free all-fiber setup, use of PM fibers only Free-beam output with excellent TEM00 mode Compact design: optics and electronics just in one box Low power con...

    Munich, Germany
  • TOPTICA FemtoFErb 1560

    TOPTICA FemtoFErb 1560

    • Manufacturer: Toptica

    50 fs – 140 mW – 100 MHz (typical) SAM mode-locking technology Alignment-free all-fiber setup, use of PM fibers only Compact design: optics and electronics just in one box Ideal laser source for time-domain THz a...

    Munich, Germany
  • TOPTICA FemtoFErb 1560 FD6.5

    TOPTICA FemtoFErb 1560 FD6.5

    • Manufacturer: Toptica

    6.5 meter fiber length (standard) Single-mode, polarization-maintaining fibers Dispersion compensation integrated in laser head Short pulses (typ. 50 fs) at fiber output FC/APC connectors on external fibers, deta...

    Munich, Germany
  • TOPTICA PFD pro

    TOPTICA PFD pro

    • Manufacturer: Toptica

    Broad range of offset frequencies 5 MHz .. 10 GHz Support of frequency scans and jumps User friendly remote control Designed to cooperate with FALC pro TOPTICA’s brand new PFD pro is a broadband phase and frequen...

    Munich, Germany
  • TOPTICA DL-SHG pro

    TOPTICA DL-SHG pro

    • Manufacturer: Toptica

    Resonant frequency doubling stage Wavelengths: 210 .. 680 nm, linewidth 1 .. 120 kHz AutoAlign, PowerLock and FiberMon options With digital control DLC pro: Less drift & linewidth The grating stabilized diode las...

    Munich, Germany
  • TOPTICA TA-FHG pro

    TOPTICA TA-FHG pro

    • Manufacturer: Toptica

    Two resonant frequency doubling stages SUV and AutoAlign options - unprecedented DUV power & lifetime PowerLock output power stabilization With digital control DLC pro: Less drift & linewidth The TA-FHG pro is a ...

    Munich, Germany
  • TOPTICA SHG pro

    TOPTICA SHG pro

    • Manufacturer: Toptica

    Compact module for resonant frequency doubling Best cw conversion rates Wavelengths: 205 .. 800 nm, linewidth dependant on seed laser Highest stability and Ease of Use: pro technology For Ti:Sapphire, dye, gas, f...

    Munich, Germany
  • TOPTICA MSHG pro

    TOPTICA MSHG pro

    • Manufacturer: Toptica

    Highly-stable resonant frequency-doubling stage Spectral coverage 330 .. 780 nm with power up to 2 W from PM fiber Includes AutoAlign for coupling into amplifier chip, doubling stage and output fiber Low noise an...

    Munich, Germany
  • TOPTICA TA-SHG pro

    TOPTICA TA-SHG pro

    • Manufacturer: Toptica

    Resonant frequency doubling stage Wavelengths: 330 .. 780 nm, linewidth 1 .. 120 kHz AutoAlign and FiberMon options PowerLock output power stabilization With digital control DLC pro: Less drift & linewidth The TA...

    Munich, Germany
  • TOPTICA DL pro

    TOPTICA DL pro

    • Manufacturer: Toptica

    Intelligent locking to absorption lines or HighFinesse wavelength meters Convenient local and remote operation (with DLC pro) Efficient atom cooling with narrow linewidth down to 0.6 kHz free running Linewidth be...

    Munich, Germany
12

Overview

Lasers and light sources are essential tools in various industries, including manufacturing, medical, and scientific research. These devices emit focused light beams used for cutting, engraving, medical procedures, and experiments. Depending on the application, lasers can vary in power, wavelength, and design.

FAQ

What should I consider when buying a used laser or light source?

Check the device's power rating, wavelength, and overall condition. Ensure it meets the requirements for your specific application and verify any available maintenance records.

How do I ensure the laser or light source is shipped safely?

Use a transport service experienced in handling delicate equipment. Ensure the device is properly packaged, with adequate cushioning and protection against shocks.

What is the maintenance schedule for lasers and light sources?

Regular maintenance includes cleaning optical components, ensuring proper cooling, and checking electrical connections. Refer to the manufacturer’s manual for specific maintenance guidelines.