- Trusted Seller
2021 Lantech C-1000
- Manufacturer: Lantech
- Model: C-1000
Lantech C-1000-Tape Case Erector, 2021 – Standard 2″ tape Previously ran: – 12″ L x 9″ W x 8″ H and 14.5″ L x 11.5″ W x 11.5″ H cases – Left handed cases (test for multiple wall)
- Trusted Seller
Toledo, OH - Trusted Seller
Lantech 18" X 72" Heat Shrink Tunnel - St700
- Manufacturer: Lantech
Made In Usa Name: Heat Shrink Tunnel | Arrival date: 06-12-2025 | Dimensions l x w x h (inches): 78 x 47 x 62 | Capacity: 18" X 72" | Electrical: 1/50/60/230 | Weight (lb.): 945 | Available quantity: 1
$120 USDEuclid, OH - Trusted Seller

Lantech Shrink Wrapper, Model: SVDS-80LG
- Manufacturer: Lantech
Lantech Shrink Wrapper Mfg: Lantech Model: SVDS-80LG
Toledo, OH - Trusted Seller

Lantech SW-1000 Intermittent Motion Belt Feed Side Seal Wrapper w/ Lantech ST-900 Heat Tunnel
- Manufacturer: Lantech
Units is USED. Some minor scratching/blemishes/scraps/small dents can be seen on the surfaces of the unit, but is not affecting the unit intended use. The unit was removed a working environment and was functionin...
Hiram, OH - Trusted SellerAuction

Lantech Stretch Wrapper, Model Q300, 120 Volt, S/N QM031729
- Manufacturer: Lantech
- Model: Q300
Lantech Stretch Wrapper, Model Q300, 120 Volt, S/N QM031729
Hamilton, OHVisit Auction Website - Trusted Seller

Lantech Q300XT
- Manufacturer: Lantech
- Model: Q300
All parts ordered before 3:30 pm (EST) typically ship same day via UPS, FedEx, or USPS! If the order is placed after 3:30 pm and you still would like it send out same day, feel free to reach out to us and we will...
- Trusted Seller

LANTECH Q300XT Semi-Automatic Stretch Wrap Machine
- Manufacturer: Lantech
- Model: Q300
This listing is for a USED Lantech Q300XT Semi-Automatic Stretch Wrap Machine. It is designed for pallet wrapping applications to secure loads for shipping and storage. This unit is categorized as a semi-automati...
- Trusted Seller

Lantech Q300XT Pallet Stretch Wrapper
- Manufacturer: Lantech
- Model: Q300
Lantech Q300XT Pallet Stretch Wrapper Used Lantech pallet stretch wrapper, model QX300XT, 65" diameter turntable, 120 volts, with controls, serial number QX007604. � �
Michigan, USA - Trusted Seller

2021 Lantech SLA
- Manufacturer: Lantech
- Model: SLA
Automatic Pallet Wrapper with 5 Feet Infeed and 5 Feet Discharge Conveyor, Pass Through Section Conveyor is 12 Feet, Safety Arm Rails Deploy when Wrapping, Conveyor Height is Estimated 36 Inches Tall, 480 Volts, ...
Hickory, NC - Trusted Seller
2010 Lantech S2500
- Manufacturer: Lantech
In Production up to September 2025, Automatic Pallet Wrapper with 5 Feet Infeed and 5 Feet Discharge Conveyor, Pass Through Section Conveyor is 12 Feet, Safety Arm Rails Deploy when Wrapping, Conveyor Height is E...
Hickory, NC - Trusted Seller

Lantech Q300 stretch wrapper
- Manufacturer: Lantech
- Model: Q300
This is a very nice used stretch wrapper with only 6798 wraps on the counter. Tested in good operating condition. Load capacity and dimensions - Maximum Load Weight: 4,000 lbs - Maximum Load Wrap Height: 80 inc...
- Trusted Seller

Lantech Stretch Wrapper Automatic SLC
- Manufacturer: Lantech
Lantech, Model SLC, automatic, overhead rotary stretch wrapper. Wrap diameter: 80". Load Size: 52" in Length; 48" in Width; 12" to 80" in Height. Equipped with EZ thread roll carriage, stretch plus wrap head, wit...
Carol Stream, IL - Trusted Seller

Lantech Q1000 or QAuto
- Manufacturer: Lantech
Automatic Pallet Wrapper with 10 Foot Infeed and 10 Foot Discharge Conveyors at 24″ Elevation, 480 Volts, 3PH, 60HZ, 80 PSI, Safety Caging, 20″ Film Carriage, Wraps up to 30 Loads per hour, Allen Bradley MicroLog...
Hickory, NC - Trusted Seller

Lantech Stretch Wrappers
- Manufacturer: Lantech
Valiant Industries presents Lantech Stretch Wrappers delivering major stretch wrapping quality improvements and performance levels never before possible. Description Lantech Automatic Stretch Wrappers Stretch wra...
Gallatin, TN 
Lantech Q300 Packaging Machinery
- Manufacturer: Lantech
- Model: Q300
Good condition Lantech Q300 Packaging Machinery manufactured in 2006. Located in USA and other countries. Click request price for more information.
USA

