Used Processing in British Columbia, Canada

20' Hemco Trimmer

• Manufacturer: Hemco

- Board dealer c/w 6 strand 81X, motor & drive - good condition - Trimmer - Left hand, 11 saws, 22" diameter carbide, 7 HP on "0" saw, 5 HP on all others, 11 cylinders, 9 air actuators. Will pass 24 ft board. Inf...

30' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Nine (9) 8" diameter x 26" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

8' x 40' Pel-Pro Single Pass Dryer

• Manufacturer: Pel-Pro

- 20 HP drive - ID of burner is 42" - ID of the heater is 54" x 18' long - PEL-PRO 8’ x 40’ Single-pass Drum-dryer c/w Drive unit. All is in good condition - The burner information: GP Combustion Equipment Inc.; ...

Hammer Hog System

- 21" x 36" opening - 250 HP, 1200 RPM, 460 volt motor c/w soft start - Screen has approx. 4" x 2" openings - Six (6) rows of hammers c/w spare set - 24" wide x approx. 16' long belt conveyor c/w MDI metal detect...

PEI Four (4) Canister TCO (New)

• Manufacturer: PEI

Fabricated TCO components - Base hopper sections - Mid sections - Retention chamber components - 72" diameter inlet header duct, approximately 60' - 80" diameter outlet header duct, approximately 60' - 74" diamet...

'V' Flight Scan Conveyor

- Manufactured by SawQuip - Approx. 42' c/c head and tail sprockets - H124 chain c/w flights every 24" - Head shaft assembly (no drive) - Tail shaft assembly

Belt Head & Tail Drum

44' Dynamic Action Vibrating Conveyor

• Manufacturer: Dynamic Action

- Balanced - c/w sheave but no motor - 24" wide (narrows down to 18" at the transition end) - Would require a new transition piece

30" x 135' Troughing Conveyor

- Truss frame construction c/w catwalk (Approx. 7' wide x 4'-4" high) - Three (3) sections (32'-6", 55'-6" and 48'-0") - Tail pulley assembly - No head pulley on drive - Belt

16" x 48" Radar High Pressure Blower

• Manufacturer: Radar

- Series 3200 - Displacement 16.7 - c/w silencer on top of blower

Lunden Stacker System - Right Hand

• Manufacturer: Lunden

- Package size 48" wide x 72" tall - Bar type unscrambler - Accumulation chains - Even ending chain fence - Lunden stacker (no stick placer) - Boxing forks to create a fixed package width - Take away chain transf...

LSI Stacker c/w Stick Placer

• Manufacturer: LSI

- Right hand - 8' to 20' - 54" wide x 48" high package - 1-1/2" wide x 3/4" thick x 54" long stickers - Five (5) chainways c/w electric drive - Six (6) forks c/w linear positioner actuator - Five (5) arm hoist c/...

20' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Seven (7) 8" diameter x 34" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

24' Rollcase

• Manufacturer: Canadian Mill Equipment

- Pop up c/w air bags - Rolls are approximately 48" wide - Approximately 24' long - No drive

25' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Eight (8) 6" diameter x 36" wide bedrolls (2-3/16" shafts) - c/w RC80 double single drive chain mounted onto a channel frame c/w legs - 4' centers - No drive unit