Used Processing in British Columbia, Canada

Stamler BF70 Feeder

24 in. wide flights. Capacity up to 1100 TPH Comes with Stamler Hydraulic Power Pack 30 hp Electric/hydraulic drive 208-230/460 volt Complete with tank and after cooler All mounted on steel fabricated covered stand

36 in. x 20 ft. Belt Feeder. 10 Ft. High Overall. Complete with Steel Hopper.

36 In. X 20 Ft. Belt Feeder. 18 In. Winged Pulley. 18 In. Rubberized Head Pulley. 5 In. X 35° Troughing Rollers. #140 Drive Chain - Sprockets Are 70 To 17. C/W Steel Hopper.

Tri-Metal 20in Ventilation Fan

• Manufacturer: Tri-Metal Fans
• Phase type: Three-phase

Overall Dimensions: Dom: 08/1995 | Size: 20in Inside Diameter | Blades: 7 Fan Blades | Pitch: 8° | Drive: Teco Electric Motor | Power output: 5HP | Speed: 3480 RPM | Voltage: 230/460 Volt | Frequency: 60Hz | Phas...

36in x 36in Ventilation Fans

Fan 1: 6 Blades 3in Wide x 10.5in Long Fan 2: 6 Blades 5in Wide x 10in Long Fan 3: 4 Blade 5.5in Wide x 10in Long Fan 4: 6 Blade 3in Wide x 10in Long Fan 5: 4 Blade 5.5in Wide x 10in Long Fan 6: 4 Blade 5.5in Wid...

Korfmann 16 in. Ventilation Fan

• Manufacturer: Korfmann

Air operated. View Spec Sheet Below Inlet: 16 in. | Outlet: 11 in. | Height: 38 in.

Korfmann 16 in. Ventilation Fan

• Manufacturer: Korfmann

Air operated. View Spec Sheet Below Inlet: 16 in. | Outlet: 11 in. | Height: 38 in.

Meco 12in. Air Operated Fan

• Manufacturer: Meco

8.5 psi 6 Blade Fan Size: 12 Inch | Flow rate: 540 CFM

Donaldson Power-Core CPC4 Dust Collector

• Manufacturer: Donaldson / Torit / DCE

Valves: 4 Goyen Air Operated. With Goyen RCA3-5V Pilot Solenoid Valve Controller Disposal Hopper Dimensions: Manual controlled sliding discharge gate Mounted on 3in x 3in Angle Iron Stand Overall Dimensions:

Pneumatic Products Air Dryer

Pneumatic Products Air Dryer. DHA AMLOC energy saver air dryer. Manufactured in 1994.

Cardwell Vib-o-vey 24 in. x 27 ft. Conveyor

• Manufacturer: Cardwell
• Model: VC1659

24 in. wide 27 ft. long Previously conveyed tobacco Please contact for more information View more Vibrating Conveyors

Cardwell 24 in. x 27.58 ft. SS Vibrating Conveyor

• Manufacturer: Cardwell

Motor: 7.5 HP Reliance Electric Motor. Usable on 208V @ 23 AMPS.

Hytrol 24 in. x 14.5 ft. Channel Conveyor

• Manufacturer: Hytrol

24 in. wide. 5 ft. long. Walkover catwalk mounted on casters. Baldor Reliance .5 HP Motor Volts 208-230/460. RPM 1725. Hytrol 4A Gear Drive.

Chantland MHS 22 in. x 40 in. Belt Conveyor

Includes guides. Baldor 1 HP Motor Boston 1.94 HP Gear Drive. 2 Duff Norton Mini Pac Actuators. Cat # LR 55270. Motor HP 1/10. Rated output 500 lbs. Speed 35 in/minute. Volts 115 AC. 1 Photo beam electric sensor.

Spencer High Pressure Blower With 40 HP Motor.

Spencer High Pressure Blower. Four Bearing Outboard Multistage. Approx. 30" Diameter. 8" Inlet And Discharge. Driven By 40 Hp Motor. 208-220/440 Volt, 3550 Rpm. All Mounted On Common Steel Frame.

AE Fan Equipment 0.75HP Centrifugal Blower

• Manufacturer: AE Fan Equipment
• Phase type: Single-phase

With Silencer Skid Mounted Allen Bradley On/Off Switch Overall Dimensions: