Used Materials Testing in Flanders, Belgium

Calibration Pull off Tester

Calibration for a Pull off tester with one channel under ISO17025 accreditation 327-CAL The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. Europea...

C408-03 Crack width gauge for levels (5 pcs)

Crack width gauge for difference in levels (5 pcs) Range 40 mm, readings per mm

CA408-01 Crack width gauge for corners (5 2 pcs)

Crack width gauge for corners (5*2 pcs) Range 40mm, readings per mm

Justification Automatic Pull off Tester

Rectification of an automatic Pull off tester DY-2 following ISO7500-1 (wièout annex C) èe tester will be ready for a calibration under ISO7500-1 after èie rectification (calibration not included)

Calibration Ductilometer three lc

Calibration Ductilometer Apparatus with three load cells

Calibration Blaine Apparatus: k-factor EN196-6

Calibration Blaine Apparatus k-factor following EN 196-6

E017 Fineness of fly ash by wet sieving

Fineness of fly ash by wet sieving

S165-01 KIT Cone digital penetrometer, complete

Cone digital penetrometer, digital, complete Penetrometer standaard digitaal bestaat uit: - Aluminium base with leveling screws and spirit level. - Chromed vertical rod with "micrometric vertical displacement dev...

Installation and training on site by producer

Installation and training on site for èe Four Point Bending Beam Testing System

Calibration Load Measuring up to 3000kN

Calibration Load Indicating Device up to 3000 kN The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited according ...

Calibration ISO 17025 Load Measuring up to 200 kN

Calibration under ISO17025 accreditation of a Load Ring up to 200kN. Certificat by a accredited laboratory after payment. The calibration/testing services offered in this quotation are performed by European Lab S...

Calibration Rebound Hammer

Inspection with calibration of a Rebound Hammer Certificate is available after paiment of invoice The device must reach your Sint-Niklaas offices through your services. We can arrange for transport after calibrat...

BOHME ABRASION TESTER, EN 1338, 1339, 1340, 13892-3, 14157

BOHME ABRASION TESTER

Calibration SRT Skid Tester

Calibration Sieve

Inspection and calibration of a woven sieve to 3.55 mm opening in accordance with ISO-3310. Includes traceable report (sent after payment of invoice). The sieves must be clean for calibration and assembled.