Used Machine Tools in Sonora, Mexico

Brake for drilling machine part 3121-0861 brand ATLAS COPCO

• Manufacturer: Atlas-Copco

Drill brake part 3121-0861, Atlas Copco brand Never used

Atlas Copco brand 7/4" SECOROC drill bit

• Manufacturer: Atlas-Copco

Atlas Copco 7/4" SECOROC Drill Bit 7/4" (44.45 mm) SECOROC Drill Bit Manufacturer: Atlas Copco CROSS TYPE DRILL BIT Conical cross-type drill bits, generally used for hard and abrasive rock formations Never used

DESI XL5 Hammer Drop Center Drill Bit 17 1/8"

• Manufacturer: DESI

DESI XL5 Drop Center Drill Bit, 17 1/8" Hammer Never used

NUMA 012994 PISTON FOR SCHRAM DRILLING MACHINE. (DRL-0006)

• Manufacturer: NUMA

NUMA 012994 PISTON P/PERFORADORA SCHRAM. (DRL-0006) No.Parte 012994 PISTON P/PERFORADORA SCHRAM. (DRL-0006) Nunca usado PCP

HAAS MINI MILL CNC MACHINE CENTER YEAR 2008 SERIAL 1069351 - AXES 1612

• Manufacturer: Haas
• Model: MINIMILL

Max. Load on Table 500 Lbs X Travel 16" Y Travel 12" Z Travel 10" Power 7.5 hp RPM 6,000 RPM # ATC 10 Taper CAT-40 Control Haas

NUMA 062623 PRC 50 5.500 HRD BIT MCA SCHRAM DRILL (DRL-0006)

• Manufacturer: NUMA

NUMA 062623 PRC 50 5.500 HRD MCA DRILL BIT SCHRAM DRILL (DRL-0006) Never used PCP

ROBIT 01-251-127-2072 5 T51 DSR RETRACTABLE DRILL BIT (SIMBA EQUIPMENT)

• Manufacturer: ROBIT

ROBIT 01-251-127-2072 5 T51 DSR RETRACTABLE DRILL BIT (SIMBA EQUIPMENT) Never used PCP

CNC MACHINE CENTER FADAL 6030 YEAR 1994 SERIAL 9406371

• Manufacturer: Fadal

Fadal CNC Control 88HS Max table load: 4,120 Lbs | X axis travel: 60" | And axis travel: 30" | Z axis travel: 30" | Spindle motor: 22.5 Hp | Spindle speed: 10,000 Rpm | Spindle taper: 40 Ct | Tool changer: 21 Atc...

CNC MACHINE CENTER GANESH 4924 YEAR 2017 - AXES 49X24

• Manufacturer: Ganesh

Weight on table: 170 lbs. | X-axis: 49″ | Y-axis: 24″ | Z-axis: 27″ | Spindle taper: CAT40 | Maximum speed: 8,000 rpm | Horsepower: 15 | Tool capacity: 24 | Control: Fanuc Oi-MD | Machine weight (approx.): 17,80...

HAAS MINI MILL CNC MACHINE CENTER YEAR 2000 SERIAL 22675 - AXES 1612

• Manufacturer: Haas

Length 84” Width 71” Height 102” Max load on table: 500 lbs. | X travel: 16" | Y travel: 12" | Z travel: 10" | Spindle speeds: 6,000 RPM | Spindle taper: CAT #40 | Tool capacity: 10 ATC | Motor: 7.5 HP | Weight: ...

MANDRINING MACHINE MODEL 25-A - WITH TABLE 40” X 75”

Table 40” X 75”, 2 1/2” Mandrel Bar with Counterbalance, Approximate Vertical Travel of 50”, Table Travel 64” X 60”, 10 Hp Motor Approximate weight 30,000 lbs

SHARP SV-2414S-iF CNC MACHINE CENTER 2414 AXLES

• Manufacturer: Sharp

Fanuc Oi-Mate-MD CNC Control Dimensions 72.8" x 85" x 91.5" Weight 7,260 lbs.

CENTER OF CNC MACHINING DAHLIH DL MCV-1020 YEAR 1999 SERIAL 10201568. DEPOSIT. CUSTOMS ENTRY 25 23 1847 5003883

• Manufacturer: DAHLIH

Table 52” x 20" X -40" Y -20" Z -22" Power 15 hp RPM 4,000 RPM # ATC 25 Control CNC (FANUC 18M)

CENTER OF CNC MACHINING FEELER HV-1000 YEAR 2010 SERIES HVGX046 WITH 4TH AXIS. USED IN THE CONDITIONS IT IS IN

• Manufacturer: Feeler

X - 40.16"\nY - 22.05"\nZ - 23.62"\nPower - 30 hp\nRPM - 15,000 RPM\n# ATC - 24\nTaper - Big Plus 40\nCNC Control (FANUC 0IM-D)\nDimensions 120" x 110" x 130"\nWeight 15,763 lbs - 7,150 Lbs

INGETROL 200634 HQ BIT (EXPLORER 500)

• Manufacturer: INGETROL

INGETROL 200634 HQ DRILL BIT (EXPLORER 500) Never used PCP