Used Machine Tools in Saitama, Japan

1997 Extrude Hone EX-800 (abrasive flow processing machine)

• Manufacturer: Extrude-Hone

Product name: Other general machine tools | Main specifications: Clamp stroke: minimum 34.5 mm, maximum 284.5 mm; Clamp cylinder spacing: 500 mm; Flange outer diameter: Φ180 mm; Clamp output: 11 tons; Media cyli...

2001 Imahashi Manufacturing Dressing Machine [DM-10]

• Manufacturer: Imahashi Manufacturing

Product name: Other | Main specifications: Exclusively for CG7E grinding wheels. Dressing shaft rotation speed: 1000-4000 rpm. Dressing wheel diameter: 150-255 x 25 x 50.8

GM-850

• Manufacturer: Gifu Wood Works

This product is used. The condition is as shown in the photos. People who can come to pick it up are very welcome. You can inspect the actual item. If you change the blades or the angle of the surface plate, you ...

2014 Nakamura Material feeder

• Manufacturer: Nakamura

Product name: Other | Main specifications: Material feeder

Iron surface plate [W2000 x D5000 x H400].

Product name: Other | Main specifications: W2000 x D5000 x H400 (height to foot 400mm)/board thickness 50mm 8300Kg

2013 RION RAT-200

• Manufacturer: RION

Product name: Air tank | Main specifications: 210l

Anest Iwata SAT-120-140

• Manufacturer: Anest Iwata

Product name: Air tank | Main specifications: 120ℓ

1988 Toshiba ST-150L

• Manufacturer: Toshiba
• Model: ST-150L

Product name: Air tank | Main specifications: Max. working pressure 11kgf/cm2, capacity 150L

2005 Daitoku 500L

• Manufacturer: Daitoku

Product name: Air tank | Main specifications: Volume: 500 L Maximum working pressure: 0.97 MPa

2004 Yuken Kogyo YK-40V-10B-22 (chip compressor)

• Manufacturer: Yuken

Product name: Other chemical machinery | Main specifications: Output: 390KN, Forming dimensions: Φ70 x 65, Compression pressure: 98MPa, Bridge breaking device included, Working time: 30 seconds, Main motor: 3.7k...

1998 Toshiba MGC-315B (NC Gun Drill)

• Manufacturer: Toshiba

Product name: Other NC machine tools | Main specifications: TOS888 Plain type Table size: :3000 x 1500 S(X/Y/Z): 3000 x 1400 x 800 with milling spindle

2008 Seiwa Tekko MS-30NC (NC hobbing machine)

• Manufacturer: Seiwa

Product name: Other NC machine tools | Main specifications: FANUC Series 18i-MB, max. outside diameter 300 mm, max. module m-6, work table diameter 350 mm, hole diameter 80 mm, vertical travel distance of hob sa...