RAPID AUTO ROLL DOORS ASA-3000
used
- Manufacturer: RAPID AUTO ROLL DOORS
8 x plastic ASA flexible doors - IN GOOD CONDITION Offer highly efficent solutions against noise, dust, tempertature or vermin Discover an important breakthrough in Rapid Auto-Roll Technology with opening and c...
$363 USDWestern Australia, Australia
TRIPAX and Unknown GAS FIRED DRYING OVENS
used
- Manufacturer: TRIPAX and Unknown GAS FIRED DRYING OVENS
2 of LPG fired drying ovens available. Able to maintain temperature of 70 degrees C whilst drying product on a continuous belt. Together, these 2 dryers dry 4.5-5 tph of wet product in and remove up to 700kg PH...
Western Australia, Australia- Trusted Seller
Effluent Water Treatment plant
used
Capacity: 1500 m³/hr | Oem: USF / West Pure | Year of operation: 1998 | Upgraded in: 2020 with Fenton Process
Hawthorn, Australia - Trusted Seller
Fryma Stainless Steel Jacketed Mixer Vessel
used
- Manufacturer: Fryma
- Capacity: 50L
- Size: 450mm dia x 410mm deep
Stainless Steel Jacketed Mixer Vessel, “Fryma” Type DT-50, 50L working capacity, size 450mm dia x 410mm deep, grade 316, jacketed dished bowl with scrapper driven by a 1.1kw geared drive and high shear mixer with...
Sydney, Australia - Trusted Seller
Wenger Pre Conditioner/ Conditioning Drum / Extruder
used
- Manufacturer: Wenger
Horizontal Twin Shaft DDC Differential Diameter Cylinder Pre- Conditioner/ Conditioning Drum. “Wenger” Model 1-000, Approximate 500mm wide x 1500mm long oblong cylinder and approx. 300mm dia paddles with top and ...
Sydney, Australia 
Stainless Ribbon Mixer 800 litre
used
- Manufacturer: Stainless Ribbon Mixer
Stainless Steel Ribbon Mixer Inside dimensions 700mm x 2100mm, top mounted screen 700mm x 700mm. Discharge 100mm with valve. 11kw 415volt motor. Inspection lids both ends with interlocks. Transport dimensions ...
Filter Press (MQP099)
used
Jian Hua Type XMY60/1000 39 polypropylene 1000mm x 1000mm plates Filter area 60m2, volume 923 litres, cake thickness 30mm. Max filter temp – 80 degrees, max filter pressure 10 bar. Hydraulic clamping. Comes with ...
Drum Separator (MQP005)
used
- Manufacturer: maxon machinery
Wemco, 4500 mm x 7000 mm dual compartment, No. of Lifters in primary compartment: 56, No. of Lifters in secondary compartment: 36, drum speed: 0.7 rpm. Drive arrangement: elect motor/vee belt/gear. Unit has not b...
DCE Dalamatic DU202
used
- Manufacturer: Donaldson / Torit / DCE
DCE Dalamatic DU202 F6 reverse pulse dust collector. 4kw 415volt.
$2,738 USDBoolaroo, Australia
Thickener
used
- Manufacturer: maxon machinery
Supaflo 2m thickener clarifier. 4 rake arms. 2000mm inside diameter, empty weight 1000kg, weight full 7300kg,. slopes 1:4 cone into 45 degree cone. Brive Brevini .55kw, 415volt, ratio 1120:1 With manual and GA dr...
- Trusted Seller
2004 John Deere 930
used
Wovr status: WOVR N/A | Incident type: Impact | Compliance date: CIRCA 2004 | Odometer (reading not visible): -- | Hour meter (reading not visible): -- | Registration: No Registration | Gst status: GST Included ...
Bibra Lake, Australia 
2000 Jian Hua Type XMY60/1000
used
- Manufacturer: Jian Hua
Jian Hua Type XMY60/1000 39 polypropylene 1000mm x 1000mm plates Filter area 60m2, volume 923 litres, cake thickness 30mm. Max filter temp - 80 degrees, max filter pressure 10 bar. Hydraulic clamping. Comes w...
1992 Munters MX1500S
used
- Manufacturer: Munters
This unit is in good working condition. It requires a steam source to work.
FRYMA MZ110
used
- Manufacturer: Fryma
- Model: MZ
Fryma Model MZ110 toothed colloid mill. The FRYMA MZ110 is an inline toothed colloid mill suitable for slurries, that grinds solids and homogenizes the slurry. The required fineness can be adjusted by means of ad...
Melbourne, AustraliaECO-CREATION ECP-10011
used
- Manufacturer: ECO-CREATION
Pyrolysis plant was last used to convert HDPE plastic waste into diesel/oil . Only used for 3 months. Was able to convert 1 tonne of HDPE into approx 750 litres of diesel/oil. 14-16hr startup, then once operating...
Melbourne, Australia
Fryma VME-12 Homogenizer
used
- Manufacturer: Fryma
- Model: VME-12
Good condition Fryma VME-12 Homogenizers manufactured in 1992. Located in Netherlands and other countries. Click request price for more information.
Netherlands
Tip: Enter manufacturer, model or keyword
