- Trusted Seller
Single roller mill 18″x4′ Krupp brand
used
- Manufacturer: Krupp
Single roller mill 18″x4′ Krupp brand Brand: Krupp With feeder. PCP
Hermosillo, Mexico - Trusted Seller
Krupp DBst
used
- Manufacturer: Krupp
- Model: DBST
Pre-owned die-flanging machine. Tooling: 153 mm | Can height min.: 170 mm | Can height max.: 290 mm | Can / ends diameter maximum: 153 mm | Can shape: round | Speed (up to): 100-220 cans per minute
Middelharnis, Netherlands - Trusted Seller
Krupp DBst
used
- Manufacturer: Krupp
- Model: DBST
Tooling: 127 mm | Can height min.: 127 mm | Can height max.: 236 mm | Can shape: round | Speed (up to): 60-180 cans per minute
Middelharnis, Netherlands - Trusted Seller
1971 Krupp DBst
used
- Manufacturer: Krupp
- Model: DBST
Pre-owned die-flanging machine. Tooling: 42 mm | Can shape: round | Speed (up to): 400 cans per minute
Middelharnis, Netherlands - Trusted Seller
Krupp SDvt II
used
- Manufacturer: Krupp
- Model: SDVT
Pre-owned duplex slitter with feeding unit. The duplex slitter is equipped with a tandem axis frame for the second slitting operation, significantly reducing the time needed to adjust the can height. Especially u...
Middelharnis, Netherlands - Trusted Seller
Krupp SDvt II R
used
- Manufacturer: Krupp
- Model: SDVT
Pre-owned double slitting machine with automatic sheet feeder. The in total approx. 29 set of knives can be adjusted hydraulically.
Middelharnis, Netherlands - Trusted Seller
Deinze, Belgium - Trusted Seller
1978 KRUPP PEDRN-100
used
- Manufacturer: Krupp
pressure 100 t throat - mm stroke 8 - 116 mm total power requirement 8 kW weight of the machine ca. 7,5 t dimensions of the machine ca. ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Strok...
Gorxheimertal, Germany - Trusted Seller
Krupp 1.25m Dia. x 3.0m Rod Mill (Stabrohrmühle)
used
- Manufacturer: Krupp
Size: 1.25m Diameter x 3.0m Long (4ft x 12ft) | Feed type: Drum Feed | Discharge type: Trunnion Overflow | Liner configuration: Rubber Lined | Lube system: Central Greasing | Drive: 50kW Electric Motor with Redu...
Europe - Trusted Seller
KRUPP PST-A 160
used
- Manufacturer: Krupp
- Model: PST-A 160
- Stroke: 210 mm
The was produced in 1980. The machine has a pressing force of 160 tons, while the cutting force is 400 KN. The press can work on 11 stages, including the cutting stage. The ram is capable of 15-75 strokes per min...
- Trusted Seller
1972 Krupp PDqV 4 - 500
used
- Manufacturer: Krupp
- Model: PDQV 4 - 500
- Stroke: 850 mm
The machine is in good condition, possible to test it. Retrofit of electro cabinet and mechanical parts. DRO.
Brno, Czech Republic - Trusted Seller
1972 KRUPP PDqV 4-500
used
- Manufacturer: Krupp
After the GO in 2008 the press was in operation for a maximum of 100 hours. In the years 1972-208 the press was in operation for two shifts.
Brno, Czech Republic 
1980 QUARTO cold rolling mill 500 mm
used
- Manufacturer: KRUPP
Main motor speed: 970-1036 rpm | Small rolls speed: 44 rpm | Small rolls diameter: 250 mm | Big rolls diameter: 500 mm | Roll length: 500 mm | Workable thickness: about 40 mm | Main motor force: HP 180 / kw 133 ...
Casale Sul Sile, Italy- Trusted Seller
Welding wire 0.8 mm weight 15 kg from Krupp – NOVONIT 4316 27303
used
- Manufacturer: Krupp
Wire electrode, welding rod, welding wire, flux cored wire
$94 USDWiefelstede, Germany - Trusted Seller
2012 KRUPP H-FRAME
used
- Manufacturer: Krupp
- Capacity: 350
- Stroke: 250
Capacity: 350 | Stroke: 250 | Slide adjustment: 200 | Bed area x-y: 2800 X 1800 | Slide base area x - y: 2500 X 1800 | Shut height: 900 | Rolling boster: NA | Die cushion capacity: NA
New Delhi, India 
Krupp SDVT Bending & Forming
used
- Manufacturer: Krupp
- Model: SDVT
Good condition Krupp SDVT Bending & Formings manufactured in 1981. Located in Spain and other countries. Click request price for more information.
Spain
Tip: Enter manufacturer, model or keyword
