Printing » Book Binding » Case/Hard Cover Binding » Kolbus » Germany

Search By Model

Building Filters

6

Used Kolbus Case/Hard Cover Binding in Germany

  • Kolbus AR

    Kolbus AR

    • Manufacturer: Kolbus

    Built in 1978 Size max 325 x 265 mm min 100 x 65 mm Book block thickness max 75 mm min 6mm Speed max 2160 c/h min 1080 c/h Power requirements 2.2 kW (220/380V, 50Hz) Length 2750mm Width 2100mm Height 1600mm Weigh...

    Helmstedt, Germany
  • Kolbus DA 270

    Kolbus DA 270

    • Manufacturer: Kolbus

    Built in 2003 Size max 670x390mm minimum 205x140 mm Speed 3,900 c/h

    Helmstedt, Germany
  • 1991 Kolbus DS 390

    1991 Kolbus DS 390

    • Manufacturer: Kolbus

    Book stackers Size: 275 x 275 x 80 mm | Speed: 3.000 c/h

    Helmstedt, Germany
  • 2003 Kolbus BF 527

    2003 Kolbus BF 527

    • Manufacturer: Kolbus
    • Model: BF 527

    . - Kolbus trimmer 142-P - co-pilot - touch screen - star wheel feeder - pre-heating - rounding and backing device - 1st gluing device - gauzing station - 2nd gluing device - head and tail banding device - pre-lo...

    Wetter, Germany
  • 2004 Kolbus BF 511

    2004 Kolbus BF 511

    • Manufacturer: Kolbus
    • Model: BF 511

    . - transport belt into BF 511 - pre-heating HB 530 station - star wheel feeder - rounding and backing station - gluing device - ribbon sucking device - head and tail banding station - pre loader cases - case ben...

    Wetter, Germany
  • 2003 Kolbus BF 527 casing

    2003 Kolbus BF 527 casing in line

    • Manufacturer: Kolbus
    • Model: BF 527 CASING IN LINE

    . - 3 knife trimmer Kolbus HD 142-P - cutting cassettes - 2 sets of knives - co-pilot - touch screen - star wheel feeder- - rounding and backing device - 1th gluing device - gauzing device - 2th gluing device - h...

    Wetter, Germany

Overview

Case/hard cover binding machines are used to attach book blocks to rigid covers, producing durable, professional hardcover books. These systems handle tasks like case-making, casing-in, trimming, and spine lining for publishers, print shops, and binderies. Models range from manual to fully automated lines that increase throughput and consistency for short or long runs.

FAQ

What should I check when buying a used case/hard cover binding machine?

Inspect wear on glue systems, clamps, conveyors, and electrical controls. Check maintenance records, test casing-in and trimming cycles, and verify spare parts availability and vendor support for the model.

How do I arrange safe shipping for a hardcover binding line?

Use a carrier experienced with print machinery. Crate delicate units, secure moving parts, drain fluids if needed, label lift points, and confirm insurance and customs paperwork for international transport.

What routine maintenance keeps these machines reliable?

Regularly clean glue tanks and applicators, check heater and cooling systems, lubricate moving parts, inspect belts and sensors, and follow the manufacturer’s schedule for parts replacement and calibration.