Used Lathes in Switzerland

Trusted Seller
2003 MAZAK QTN 200-1000L
- Manufacturer: Mazak
- Model: QUICK TURN NEXUS 200
Cnc control manufacture: MAZATROL | Cnc control manufacture model: Fusion 640T | Working range turning diameter: 350 mm | Working range swing over bed: 610 mm | Working range swing over slide: 350 mm | Working ...
Beringen, Switzerland
Trusted Seller
2019 DMG MORI NT4300DCG-1500
- Manufacturer: DMG Mori
- Model: NT 4300 DCG-1500
The MORI SEIKI NT4300DCG 1500SZ Lathe, manufactured in December 2019, is an advanced turn-mill solution designed with precision and efficiency in mind. Equipped with a Fanuc F31iB5 CNC controller, this machine bo...
Switzerland
Trusted Seller
2008 TORNOS Delta 20/4
- Manufacturer: Tornos
- Model: DELTA 204
Control manufacture: Fanuc | Control manufacture model: Oi-TD | Turning diameter max: 20 mm | Turning length max: 210 mm | Axes axis x: 4- 200 mm | Axes axis y: 1- 160 mm | Axes axis z: 4- 170 mm | Main s...
Beringen, Switzerland
Trusted Seller
2013 WEILER C30
- Manufacturer: Weiler
- Model: C30
Control manufacture: WEILER | Control manufacture model: C3 | Turning diameter over bed: 330 mm | Center height: 165 mm | Distance between centres: 750 mm | Turning diameter over cross slide: 160 mm | Hole in s...
Beringen, Switzerland
Trusted Seller
TORNOS R 10
- Manufacturer: Tornos
- Model: R10
Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...
Brügg, Switzerland
Trusted Seller
TORNOS M 4
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TORNOS R 10
- Manufacturer: Tornos
- Model: R10
Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...
Brügg, Switzerland
Trusted Seller
ESCO D 4
- Manufacturer: Esco
Diameter of work admitted: 4 mm | With flat cames: 24 mm | With feed device 11.2: 58 mm | Spindle hole: 4 mm | Number of tool cutters: 2 | Number of spindle speeds: 2 | From: 4000 t/min | Up to: 6000 t/min | Vol...
Brügg, Switzerland
Trusted Seller
TORNOS M 7
- Manufacturer: Tornos
- Model: M7
Diameter of work admitted: 7 mm | With flat cames: 60 mm | Spindle hole: 8 mm | Max. treading diameter: 6 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1400 t/min | Up to: 10000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TECHNIKUM BIEL 102
- Manufacturer: TECHNIKUM BIEL
Centre height: 102 mm | Distance between centres: 370 mm | Inner taper type: 20 W | From: 50 t/min | Up to: 1200 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 450 kg | Length: 1200 mm | Width: 700...
Brügg, Switzerland
Trusted Seller
HABEGGER NEOTOR
- Manufacturer: HABEGGER
Centre height: 102 mm | Distance between centres: 450 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Spindle hole: 20.0 mm | Inner taper type: 20 W | Taper in tailstock: 2 CM | Voltage 50 hz 3x: ...
Brügg, Switzerland
Trusted Seller
TORNOS M 4
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TORNOS R 10
- Manufacturer: Tornos
- Model: R10
Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...
Brügg, Switzerland
Trusted Seller
TORNOS M 4
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
2008 LNS Micro 8
- Manufacturer: LNS
Control: GE FANUC Series 32i-Model A | Number of axis total: 7 | Workpiece length max.: 20 mm | Max. bar diameter: 10 mm | Inner taper type: F13 | From: t/min | Up to: 12000 t/min | C axis (spindle,resolution): ...
Brügg, Switzerland
Mazak INTEGREX 400 Lathe
- Manufacturer: Mazak
- Model: INTEGREX 400
Good condition Mazak INTEGREX 400 Lathes available between 2002 and 2008 years. Located in USA and other countries. Click request price for more information.
USA