Used processing machines in Belgium

molding line HWS-HSP1, green sand

• Manufacturer: Kleine

Weight: ± 30 000 kg construction year 1996 Dimensions: 2700 mm x 2000 mm x 2700 mmSIEMENS S5 control and control panel- 132 molding boxes 650 mm x 500 mm x 200 mm- Roller conveyors 36.5 m- Air tank for SEIATSU p...

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

Screw dosing with a little bunker

Gearbox motor with speed regulation Type G22 G02- 10- VO/ DK 84- 200V 3308, 0,55 kW, 220/380 V, 1420 t/min With small pneumatic vibrating on the cone Screw not closed Speed exit 133 until 19 rpm Continuously

Small grinding table with exhauster

Useful dimensions: width 800 mm, depth: 800 mm Motor 0,25 kW, 220/380 V Grinding table with exhauster, outlet inside 200 mm x 250 mm With grating

2010 Pneumatic conveyor 30l HENSEL with small hopper

• Manufacturer: HENSEL

Dimensions: Length: 350mm; Width: 350mm, Height: 1500mm With small hopper and butterfly valve With CE mark on the conveyor

Small screw conveyro, 920 mm, Ø 145 mm

• Manufacturer: Kleine

External dimensions: length 2120mm, width 435mm, height 270mm Motor: 0,5 kW, 220/380 V, brand BAUER, 690 rpm, outlet: 19 rpm Second entrance possible

Small sandhopper, ± 1 m³

On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm

Small hopper with discharging belt EA 1450mm

Motor 2 hp, 220/380 V, 1415 rpm Band width 500 mm 6 rolls width 600 mm Driven by one trapez belt, flat gear

Small casting ladles ROPER, 300 kg

• Manufacturer: Kleine

With oilbath gearbox In good working condition Outside dimensions: length 1100 mm, h. 850 mm | Inside: Ø 450 mm, h. 500 mm

2 lifting bails for small casting ladles, ± 60 kg

• Manufacturer: Kleine

Ø hole for ladles 350 mm, ladles ± 60 kg Ø ± 370/280 mm, height 390 mm Tiltable by hand Without chain hoist With 1 control for hoist

Small vibrating dose conveyor

• Manufacturer: Kleine

Magnet vibrator Weight: ± 300 kg | Outside dimensions: 2.600 mm x 630mm, h. 650mm | Inside dimensions: ± 2300mm x 200mm, h. 60mm | Motor sinex, serial number: 28463A3, 220/380 V

Centrifugal casting machine for jewellery and small parts

Brand CABE, type C350 220 / 380 V Weight: 300 kg | External dimensions: 860 mm x 600 mm, h. 1100 mm | Ø plate: 300 mm

1997 Continuous shotblast machine for small parts TILGHMAN

• Manufacturer: TILGHMAN WHELLABRATOR

External dimensions: length 2500mm, width 2000mm, height 3800mm With 4 turbines (2 on each side), 4 kW each With carry-out device for small parts With shot dust separator With control board With dust collector

Small bucket elevator for shot blast plant

Filling height from the ground 450 mm Drop height from the ground 1860 mm Drive over 2 V-belts Cup 100 mm x 80 mm