Used Kitagawa Machine Tools in Japan

Bench Drill

• Manufacturer: Kitagawa
• Model: KDS-410

Used Kitagawa Bench Drill KDS-410,

Kitagawa JN07

• Manufacturer: Kitagawa

New used, with handle

Kitagawa VK175

• Manufacturer: Kitagawa

Kitagawa RH250

• Manufacturer: Kitagawa

φ250

Kitagawa VE160LN

• Manufacturer: Kitagawa
• Model: VE160LN

1 unit in stock

Kitagawa VQX200N

• Manufacturer: Kitagawa

There are two

Four jaw chuck Kitagawa IA6-400

• Manufacturer: Kitagawa

Commodity id: 950304KIY-6 | Maker: (Kitagawa Iron Works Co. | Model year: -

Kitagawa UVE-160K

• Manufacturer: Kitagawa

Through-hole diameter: 38 mm, grasping diameter (max/min): 170/12 mm, Stroke diameter of jaw: 8.4 mm, plunger stroke: 24 mm, Maximum allowable air pressure: 0.6 MPa, maximum static gripping force: 45 kN, Maximum ...

Kitagawa JN07T102

• Manufacturer: Kitagawa

Kitagawa KDT-410

• Manufacturer: Kitagawa
• Model: KDT-410

Vibration: 410, spindle end taper: MT No.2, spindle speed: 50 (105-1540 rpm) 60 (125-1850 rpm), Table working surface: φ325, base working surface: 260×240, outer diameter: width 364× depth 718×...

Four-jaw chuck Kitagawa IA5-200 (880801KIY2-10)

• Manufacturer: Kitagawa

8吋 Commodity id: 880801KIY2-10 | Maker: (Kitagawa Iron Works Co. | Model year: - | Specification: 8-inch

KITAGAWA VE125LN Machine Vise

• Manufacturer: Kitagawa

Mouth width: 125, Mouth height: 50, Mouth opening: 256, Total height: 135, Total width: 138, Total length: 510

Tapping Ball Machine Kitagawa KDT-410

• Manufacturer: Kitagawa
• Model: KDT-410

φ410　T:φ325　105～1540rpm MT-2 穴あけ：鋳鉄φ23 鋼φ19　Tap：鋳鉄φ16 鋼φ12 ローラー台車付き

Tapping Ball Machine Kitagawa KDT-410

• Manufacturer: Kitagawa
• Model: KDT-410

φ410　T:φ325　105～1540rpm MT-2 穴あけ：鋳鉄φ23 鋼φ19　Tap：鋳鉄φ16 鋼φ12

Tapping Ball Machine Kitagawa KDT-410

• Manufacturer: Kitagawa
• Model: KDT-410

φ410　T:φ325　105～1540rpm MT-2 穴あけ：鋳鉄φ23 鋼φ19　Tap：鋳鉄φ16 鋼φ12