Machine Tools » Lathes » Engine Lathes » Kingston

Building Filters

26

Used Kingston Engine Lathes

  • Kingston Engine Lathe, Heavy Duty

    Kingston Engine Lathe, Heavy Duty 34, 34" x 120" 26" SOCS, Taper, Inch/Metric Threading, (2) Roller Rests

    • Manufacturer: Kingston
    • Spindle bore: 103.89 mm

    Swing over bed ways: 34" | Swing over cross slide: 26" | Distance between centers: 120" | Spindle drive: 20 HP | Spindle speeds: 6-1000 RPM | Spindle bore: 4.09" | Condition: New less than 400 hours on the machi...

    East Coast of the United States, USA
  • Trusted Seller
    Kingston HR3000

    Kingston HR3000

    • Manufacturer: Kingston
    • Model: HR3000

    Model: HR3000 Notable Features Standard Equipment • 20HP, 220V/440V, 3 Phase, 60 cycle motor, switch and wiring complete • 4-1/16” Spindle Bore • Spindle Nose: D1-11 Camlock • Headstock spindle adapter ASA ...

    $39,500 USD

    Get financing

    Est. $743/mo

    Little Rock, AR
  • HS 45 / 51 Large

    HS 45 / 51 Large Swing Lathes

    • Manufacturer: Kingston

    Kingston’s HS model answers the call when you need to go big or go home. Available with a generous swing of 45” (upgradable to 51”), lengths from 60” to 472” between centers, and spindle bores up to 16”, the HS i...

    Roanoke, VA
  • Kingston Engine Lathe, HI 29120,

    Kingston Engine Lathe, HI 29120, 34" X 120", 26"SOC, 50 RPM, 20HP, 3 Jaw Chuck

    • Manufacturer: Kingston
    • Spindle bore: 215.9 mm

    Swing over bed ways: 34" | Swing over cross slide: 26" | Distance between centers: 120" | Spindle drive: 20 HP | Spindle speeds: 6-650 RPM | Spindle bore: 8.5" | Condition: Used | Equipped with:: (1) 24" Rear 4 ...

    Texas, USA
  • TRP-718 UNIVERSAL PARALLEL LATHE HEAVY

    TRP-718 UNIVERSAL PARALLEL LATHE HEAVY DUTY24 MODEL, KINGSTON BRAND

    • Manufacturer: Kingston

    Universal engine Lathe Brand: KINGSTON Country of origin: Taiwan Model HEAVY DUTY24 Center distance 25 inches French? No. Tailstock? Volteo sin escote 35" -> “Turning without gap 35"” Hmm likely 'Turnout without ...

    Guadalupe, Mexico
  • TRP-717 UNIVERSAL PARALLEL LATHE MODEL

    TRP-717 UNIVERSAL PARALLEL LATHE MODEL HL500, KINGSTON BRAND

    • Manufacturer: Kingston

    Universal engine lathe brand KINGSTON Origin Taiwan Model HL500 Swing between centers 21" Swing without gap 29" Distance between centers 70" Swing in carriage 11" Bar diameter 3" Threads mm & Std Motor 10 HP...

    Guadalupe, Mexico
  • Trusted Seller
    2012 KINGSTON HK3000

    2012 KINGSTON HK3000

    • Manufacturer: Kingston
    • Model: HK3000

    ONE USED - 30” x 120”cc KINGSTON Hollow Spindle Engine Lathe 30” Swing Over Bedways 20” Swing Over Cross Slide Taper Turning Attachment Hardways Inch / Metric Threading 12.5” Spindle thru Hole Spindle Speeds fro...

    Aurora, IL
  • Trusted Seller
    2002 KINGSTON HD26120

    2002 KINGSTON HD26120

    • Manufacturer: Kingston

    ONE USED - 26” x 120”cc KINGSTON Engine Lathe 26” Swing Over Bedways 17” Swing Over Cross Slide 35” Swing in Removable Gap Hardways Inch/Metric Threading Taper Turning Attachment 4.125” Spindle thru Hole Spindle...

    Aurora, IL
  • Trusted Seller
    1997 KINGSTON HD26160

    1997 KINGSTON HD26160

    • Manufacturer: Kingston

    ONE USED - 26” x 120”cc KINGSTON Engine Lathe 26” Swing Over Bedways 17” Swing Over Cross Slide 35” Swing in Removable Gap Hardways Inch/Metric Threading Taper Turning Attachment 4.125” Spindle thru Hole Spindle...

    Aurora, IL
  • Trusted Seller
    Kingston Model HK-3000 Oil Country

    Kingston Model HK-3000 Oil Country Engine Lathe

    • Manufacturer: Kingston
    • Model: HK-3000

    Imperial Metric Kingston Model HK-3000 Oil Country Engine Lathe 24" Chuck 12.6" Hollow Spindle Air Kickout Tailstock

    Elk Grove Village, IL
  • KINGSTON HL-2000 21" X 80"

    KINGSTON HL-2000 21" X 80" GAP BED ENGINE LATHE 3" Bore 16" Chuck 480

    • Manufacturer: Kingston
    • Model: HL-2000
    • Phase type: Three-phase

    Welcome to Select Machine Tool KINGSTON HL-2000 21" X 80" GAP BED ENGINE LATHE 16" Chuck 3" BORE SN 10730504A 1984 Stock 04156 ***Freight Quote Upon Request*** When you buy from Select Machine you are not only bu...

    $12,500 USD

    Get financing

    Est. $246/mo

    Roanoke, VA
  • Trusted Seller
    2001 Kingston Model CHK-3000 CNC

    2001 Kingston Model CHK-3000 CNC Oil Country Engine Lathe ()

    • Manufacturer: Kingston

    Imperial Metric Kingston Model CHK-3000 CNC Oil Country Engine Lathe (2001) Electrics 220/3/60 Equipped with: Fanuc OT CNC Control 24" Chuck Tailstock Foot Print 228" x 105" Steady Rest Front and Rear Chucks

    Elk Grove Village, IL
  • Trusted Seller
    1997 Kingston HD-26160 4" Hole,

    1997 Kingston HD-26160 4" Hole, Taper

    • Manufacturer: Kingston

    26"/35" X 160" KINGSTON GAP BED ENGINE LATHE MODEL: HD26160, S/N: CH97626, YEAR: 1997 SPECIFICATIONS: SWING OVER BED........................ 26" SWING OVER CROSS SLIDE................ 17-1/2" SWING IN REMOVABLE...

    $29,500 USD

    Get financing

    Est. $555/mo

    Harrison, NJ
  • Trusted Seller
    2002 Kingston HD-26120 4" Hole,

    2002 Kingston HD-26120 4" Hole, Taper, Newall DRO, Rapid

    • Manufacturer: Kingston

    26"/35" X 120" KINGSTON GAP BED ENGINE LATHE MODEL: HD26120, S/N: CH02814, YEAR: 2002 SPECIFICATIONS: SWING OVER BED........................ 26" SWING OVER CROSS SLIDE................ 17-1/2" SWING IN REMOVABLE...

    $27,500 USD

    Get financing

    Est. $518/mo

    Harrison, NJ
  • 1996 Kingston CL-38X1500

    1996 Kingston CL-38X1500

    • Manufacturer: Kingston
    • Spindle bore: 114.3 mm

    CNC Engine Lathe -EQUIPPED WITH- 15" 3-Jaw Chuck Tail Stock Steady Rest Tool Post

    Town of Rockingham, VT
12

Overview

Engine lathes are robust, versatile machines used in metalworking for turning, boring, threading, and facing operations. They are essential in manufacturing and repair shops for creating precise cylindrical parts. These lathes can handle a wide range of materials and sizes, making them highly valuable for both small-scale and industrial applications.

FAQ

What should I look for when purchasing a used engine lathe?

Check the lathe's overall condition, including the bed, headstock, tailstock, and carriage. Ensure the machine runs smoothly, with no unusual noises, and verify the accuracy of the lathe's movements.

How can I safely ship an engine lathe?

Use a specialized machinery mover with experience in shipping heavy equipment. Secure the lathe on a pallet, protect delicate components, and ensure it is tightly strapped and covered.

What is the maintenance routine for an engine lathe?

Regularly clean the machine, lubricate moving parts, and check for wear and tear. Inspect belts, gears, and bearings for signs of damage and replace them as needed. Follow the manufacturer’s maintenance guidelines for optimal performance.