- Trusted Seller
1997 INGRAMATIC RP11-RV
- Manufacturer: Ingramatic
- Model: RP-11
FLAT DIE THREAD ROLLING MACHINE Dimensions: (L x W x H): 80" x 48" x 75" * Vibratory Feeder
Vaughan, Canada 2018 Ganesh GENMILL T-700
- Manufacturer: Ganesh
Table / pallet size: 33.4" x 15.75" | X-travel: 27.56" | Y-travel: 16.93" | Z-travel: 12.99" | Rapid traverse: 2362 IPM | Cutting feed rate: 1181 IPM | Spindle taper type: BT30 | Spindle taper: BT30 BBT "Big Plu...
Town of Rockingham, VT2013 Ares Seiki S6040
- Manufacturer: Seiki
X axis travel: 23.6" | Y axis travel: 15.7" | Z axis travel: 19.68" | Pallets, number of: 2 | Pallets size: 27.55" x 15.7" | Pallets load: 550 LBS | Spindle taper: CAT 40 | Spindle speed: 8,000 RPM | Spindle mot...
Town of Rockingham, VTTote of MIKE-O-CUT LV Light Viscosity Tapping Fluid 275 Gallons Weight 2330 LBS
- Manufacturer: ASHBURN
Stantec Sales & Services is Offering the Following Equipment: Tote of MIKE-O-CUT LV Light Viscosity Tapping Fluid 275 Gallons Weight 2330 LBS Tote has been open but has been barley used. MIKE-O-CUT LV is a light ...
$1,000 USDLenapah, OK1992 Leadwell TDC-450
- Manufacturer: Leadwell
- Model: TDC450
***4 IDENTICAL MACHINES AVAILABLE*** Control: Mitsubishi MELDAS 310M | X axis travel: 17.7" | Y axis travel: 13.7" | Z axis travel: 9.8" | Table size: 23.6" x 13.7" | Table load: 330 LBS | Spindle taper: BT-30 | ...
Town of Rockingham, VT1995 Enshu DTCL-S300
- Manufacturer: Enshu
Control: Yasnac i80M-B | X axis travel: 19.7" | Y axis travel: 15.7" | Z axis travel: 11.8" | Pallets, number of: 2 | Pallets size: 27.6" x 15.7" | Spindle taper: BT 30 | Spindle speed: 10,000 RPM | Spindle moto...
Town of Rockingham, VT2015 Pee-Wee P15
- Manufacturer: PEE WEE
Forming force: 10-150 Kn | Feed of the slide: .01 - .23"/sec. | Pitch to be rolled: Max .31" | Shaft rotation: 20 - 80 rpm. | Support length: .03" | Cylinder stroke: 0 -.39" | Shaft diam: 2.12" | Roll width: 6.2...
Town of Rockingham, VT- Trusted Seller
Ridgid 500B Power Threading/Bolt Dies for 5/16in - 18 Unc
- Manufacturer: Ridgid
We currently have ONE used Ridgid 500B Power Threading/Bolt Dies for 5/16in - 18 Unc. This quick opening die head fits all Ridgid Power threading machines. It allows you to quickly change between sizes without ...
Fargo, ND - Trusted Seller
3/4" x 8"Long Uncoated, Steel, Fully Threaded Stud with Nut
- Manufacturer: Agri-Resources, Inc.
We currently have 75 fully threaded studs (with nut) available for sale. Thread Style: Fully Threaded Thread Size: 3-4 Overall Length: 8" Material: Steel Screw Size: 3/4" Material Grade: RT B7 We are asking...
Fargo, ND Walker Turner 70-400
- Manufacturer: Walker Turner
15.5" x 18" Table, 70-400 RPM, 10" Throat, Jacobs Ball Bearing Super Chuck, Face Guard 208-220, 440 Volt, 3 Phase
Plymouth, MNDelta Rockwell 70-6XU
- Manufacturer: Rockwell
Adjustable Height 22" x 18.5" T-Slot Work Table w Oil Gutters with 15.5" x 18" Work Surface, 6" Hand Quill Feed, 200 - 2,000 RPM Variable Speed Spindle, Jacobs Ball-Bearing 0-1/2" Drill Chuck, #3 MT, Machined Bas...
Plymouth, MN- Trusted SellerVaughan, Canada
- Trusted Seller
UNIVERSAL AS
- Manufacturer: UNIVERSAL
HORIZONTAL SINGLE HEAD DRILLING/TAPPING MACHINE * 17" Vibratory Bowl Feeder * Air Clamping * Coolant Pump and Tank
Vaughan, Canada - Trusted Seller
1-7/8"-8 x 14" Carbon Steel Fully Threaded Stud & 2 Grade 2H Hex Bolts-Lot of 10 Threaded Rods & Threaded Studs
- Manufacturer: Highland
Thread Size : 1-7/8"-8 Thread Class : 2A Min. Tensile Strength : 115,000 psi Material : Carbon Steel Threaded Rod Material Grade : Grade B7 Threaded Rod Finish : Black Oxide Dia./Thread Size : 1-7/8"-8 Rockwell H...
$600 USDChico, TX - Trusted Seller
Prutton 75 CNVB
- Manufacturer: Prutton
- Model: 75CNVB
HIGH SPEED PLANETARY NAIL THREAD ROLLING MACHINE * 24' Vibratory Bowl * Bulk Feeder
Vaughan, Canada Landis 16-20B Threading & Tapping
- Manufacturer: Landis
- Model: 16-20B
Good condition Landis 16-20B Threading & Tappings. Located in USA and other countries. Click request price for more information.
USA