Used Heat Exchangers in Utrecht, Netherlands

1997 Sacome 1x1-TFMI-370-1-6''/18-6000-316L/316L-HARD

• Manufacturer: Sacome

Multitube Tubular Heat Exchanger. 37 tubes in 1 tube. Length 6 meter. Product side: 200 °C - 10,0 bar - 44,08 liter - Margarine - Connection: 3'' Flange. Media side: 200 °C - 10,0 bar - 48,92 ltr - Water - Connec...

1991 GEA Ahlborn VT 4

• Manufacturer: GEA

Plate heat exchanger, sanitary (PHE). Max working pressure: 6 bar. Beam length: 165 cm, connections: 4x2" Din. Current configuration: 1 Section: 50 plates. Connections follower: 2 up/2 down. Dimensions: 38x17,5x5...

Het Stempel BV N.N.

• Manufacturer: Het Stempel BV

Tubular heat exchanger, sanitary (THE). Monotube, 1 compartment, Straight design, 8 tubes, 1 section. Length inner tube: 302 cm, length outer tube: 288 cm. Outer diameter 76 mm, inner diameter: 48 mm. Connectio...

2003 Schmidt Sigma 37 TBV

• Manufacturer: Schmidt
• Model: Sigma 37

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar. Beam length: 150cm, connections: 9x 3" SMS. Current configuration: 3 Sections: 22-91-22 plates (total 135 plates). Connections head: 2 up, follower 2 up. ...

1993 APV K 55

• Manufacturer: APV - Gaulin
• Model: K 55

Plate heat exchanger, sanitary (PHE). Pressure: 10 bar, Beam length: 147,5 cm, Connections: 4x4" DIN. Currenct configuration: 1 Section: 105 plates - Connections head: 2 down, follower 2 down. Dimensions: 130x80x...

1994 Wilhelm Deller KG 27197/1

• Manufacturer: Wilhelm Deller KG

Water = 6barr / 208C / 19 L - Steam = 6barr / 208C / 36L - 46.5kW

1998 Baelz 106-42-45-FN-B1

• Manufacturer: Baelz

Tubular Heatexchanger Steam/Water. Multitube. Spiral design. 1 Tube. 1 Section. Length: 0,95 mtr. Outer diameter 280 mm. 42x tubes of 8 mm inner diameter. Steam section: 18 bar, 250 °C, 14 ltr. Water section: 10 ...

Tetra Pak Multitube

• Manufacturer: Tetra Pak

Tube heat exchanger, straight design multitube, length: 6mtr, 7 inner tubes with diameter 22 mm, outer tube coagurated. Outer tube diameter 113 mm. Capacity: 0,41 m2x7=2,9m2. With connections product in/out DN 80...

2012 Alfa Laval Front 8 RM

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - Beam length: 180 cm, connections: 8 x 3" DIN. Current configuration: 3 Sections: 37-48-36 plates (total 121) - Connections head: 1 up and 2 down, followe...

2009 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

1977 Crepaco/APV 1HRT-672

• Manufacturer: Crepaco

Sraped Surface heatexchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10 ...

1989 Crepaco 1HRT-672

• Manufacturer: Crepaco

Scraped surface heatexchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

2005 APV Crepaco SSHE

• Manufacturer: Crepaco

Scraped heater - cooler set, used as sterilizer, including 3 holding tubes 30 - 30 - 210 seconds (various options possible on swingbend panel). Each scraped heaterexchanger has a temperature indicator on water an...

1998 Alfa Laval CLIP 8-RM

• Manufacturer: Alfa-Laval
• Model: CLIP 8-RM

Pressure: 7 bar. Beam length: 1800 mm. Connections: SMS. Current configuration: 1 Section: 164 plates - Connections head: 2 up, follower 1 down. Weight total: 1.718 kg.