Used Sheet Metal Processing in Germany

1970 REIS TUS 60 OK

• Manufacturer: Reis
• Model: TUS-60

Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570

Feed units VG 400

Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described.

1995 Transfluid DB 628

• Manufacturer: Transfluid

ex Works tube diameter 4-28 mm wall strength / mm bending radius min. / mm total power requirement 1,5 kW weight of the machine ca. t dimensions of the machine ca. m

1996 TRANSFLUID DB 628

• Manufacturer: Transfluid

ex works tube diameter 4-28 mm wall strength / mm bending radius min. 1,5 x D - 2,0 x D mm control Siemens LOGO delivery rate 4,5 l/min bending angle max. +/- 190 ° nominal pressure 250 bar operating pressure 309...

Weingarten UZH 80

• Manufacturer: Weingarten

This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 p...

1991 SCHÄFER SRMVHY

• Manufacturer: SCHÄFER

free loaded on truck sheet width 3000 mm plate thickness 16 mm pre-bending / weight of the machine ca. 15 t dimensions of the machine ca. m

1994 LANG EL-HY168F CNC

• Manufacturer: Lang

free loaded on truck tube diameter 168,3 x 11 mm tube 6000 mm bending radius max. 700 mm Control Siemens 840 D bending radius min. 80 mm bending angle max. +/- 190 ° connected load 400 V / 50 HZ /85A Dimensions (...

1986 VEB ELEKTROTECH.GERAETE 4 F - 6150

• Manufacturer: VEB ELEKTROTECH.GERAETE
• Power requirement: 1.5 kW

Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/...

WMW bmw 1000

• Manufacturer: WMW

ex Works, loaded free, truck material width 250 mm material thickness 2 mm diameter 1200 mm total power requirement kW weight of the machine ca. t

WEMA ZEULENRODA

• Manufacturer: Zeulenroda

ex Works, loaded free, truck band width 500 mm band speed 8-25 m/min plate thickness 0,5-2 mm total power requirement 2,2 kW weight of the machine ca. 0,75 t

EOC nicht bekannt

• Manufacturer: EOC
• Power requirement: 0.55 kW

HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stain...

1970 straightening machine DDR BETRIEB nicht bekannt

• Manufacturer: DDR BETRIEB
• Power requirement: 1.2 kW

straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D.

1996 SERIOUS EM 5/ N 1400

• Manufacturer: Ernst
• Model: EM 5 N 1400

Documentation: available Further information automatic grinding roller and brushing machine: Equipped with: 1 sanding roller 2 brush rollers 1 wet grinding device drying device The machine is designed for deburri...

2001 TRUMPF-PULZER MR65R

• Manufacturer: Trumpf
• Power requirement: 34.4 kW

It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrou...