Used Shearing Equipment in Bavaria, Germany

Trusted Seller
Auction
Hand tin shears
Cutting width 600 mm, with base frame
Bad Heilbrunn, Germany
Visit Auction Website
Trusted Seller
Auction
1997 AMADA GPX 1230 Hydraulic CNC Guillotine Shear
- Manufacturer: Amada
- Model: GPX-1230
Cutting capacity 12 mm steel sheet, cutting length 3000 mm
Bad Heilbrunn, Germany
Visit Auction Website
Trusted Seller
1990 Plate Shear - Mechanical, SCHRÖDER
- Manufacturer: Schroeder
- Maximum thickness: 1.5 mm
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Sheet width: 2000mm | Plate thickness: 1,5mm | Total power requirement: kW | Weight of the machine approx.: ...
Günzburg, Germany
2009 ERMAK HGS-A guillotine shears
- Manufacturer: Ermak
- Model: HGS-A
- Maximum thickness: 6 mm
- Power requirement: 11 kW
Used Ermak hydraulic guillotine shear, folding backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, and 14 hold-downs. The machine will be professionally repaired, inspected, and cleane...
Hohenbrunn, Germany
1969 Wila HS 205-3 guillotine shears
- Manufacturer: Wila
- Maximum thickness: 3 mm
Used Wila hydraulic guillotine shear, cutting length adjustment, foot pedal, without stop. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will...
Hohenbrunn, Germany
1996 EHT TSS 4-60 guillotine shears
- Manufacturer: EHT
- Maximum thickness: 4 mm
Used EHT guillotine shear with automatic stacking and transport table, light barrier, and cut counter. Includes scrap diverter, compressed air required, and a 6-meter hopper. The machine will be professionally ...
Hohenbrunn, Germany
2008 RAS POWERcut2 guillotine shears 86.33
- Manufacturer: RAS
- Maximum thickness: 6.3 mm
- Power requirement: 18.5 kW
Used hydraulic RAS motor-driven guillotine shear, stroke rate 30-50 per minute, with 1500 mm angle stop Note: The machine is currently being refurbished; the images were taken before the refurbishment.
Hohenbrunn, Germany
Trusted Seller
1989 RAS 86.30
- Manufacturer: RAS
- Model: 8630
- Maximum thickness: 6 mm
- Power requirement: 15 kW
Equipment: - electro-hydraulic guillotine shear type swing cut - RAS MULTICUT-ECO 2000 CNC control unit * movable, from the front * 3 axes control unit with up to 900 program lines * Sheet holding device for thin...
Günzburg, Germany
Trusted Seller
1995 SCHECHTL MSB/NC 250
- Manufacturer: Schechtl
- Maximum thickness: 2.5 mm
Control: conventional - | Storage location: Günzburg | Plate length: 2500mm | Plate thickness: 2,5mm
Günzburg, Germany
Trusted Seller
1994 ATLANTIC ATS 3010
- Manufacturer: Haco - Atlantic
- Maximum thickness: 10 mm
- Power requirement: 20 kW
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Sheet width: 3050mm | Plate thickness: 10mm | Cutting angle: 0,5-3° | Number of hold downs: 18 pcs | No. of ...
Günzburg, Germany
Trusted Seller
BAYKAL HGL 3106
- Manufacturer: Baykal
- Model: HGL 3100x6
- Maximum thickness: 6 mm
Control: CNC - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Sheet width: 3060mm | Plate thickness: 6mm | No. of strokes: 20Hub/min | Stroke: 750mm | Motor capacity: 11kW | Oil v...
Günzburg, Germany
Trusted Seller
PEDDINGHAUS Peddimax 602
- Manufacturer: Peddinghaus
- Model: PEDDIMAX 602
Control: conventional - | Freight basis: Delivery ex warehouse Günzburg. | Punching force: 600kN | Working pressure: 250bar | L-beam 90°: 130x12mm | Weight: 1930kg
Günzburg, Germany
Trusted Seller
1984 MUBEA HP 450/760
- Manufacturer: Mubea
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Hole diameter in sheet thickness: Ø 19 in 19mm | Pressure capacity max.: 45to | Weight of the machine approx...
Günzburg, Germany
Trusted Seller
BURNET CFMT 2560 x 4,0
- Manufacturer: BURNET
- Maximum thickness: 2 mm
- Power requirement: 7.5 kW
Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted ...
Günzburg, Germany
Trusted Seller
BURNET CFM 2100 x 4,0
- Manufacturer: BURNET
- Maximum thickness: 2 mm
- Power requirement: 7.5 kW
Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted ...
Günzburg, Germany