Used Processing in Australia

Manesty S/S Paddle Mixer

• Manufacturer: Manesty

Paddle Mixer, “Manesty”, 75 litre capacity, bowl size 680mm x 380mm x 480mm deep, stainless steel wetted parts with 370mm diameter rotor, belt driven by 3 phase 1.5kW 1440rpm motor, provided with timer and contro...

Belt Conveyor

Belt Conveyor, belt dimensions: 550mm long x 200mm wide, stainless steel structure, driven by 3 phase 0.25kw motor Follow us on: © 2024 Fallsdell Machinery Pty Ltd

3M Top and Bottom Carton Taper Sealer

• Manufacturer: 3M
• Model: 700A

Top and Bottom Carton Taper Sealer, “3M” Model 700A-l, Type: 39600, top and bottom drive, top and bottom case taping, manually adjustable, single phase, mobile Follow us on: © 2024 Fallsdell Machinery Pty Ltd

Atlas Copco HighPressure Nitrogen Generator Skid N2

• Manufacturer: Atlas-Copco

High-Pressure Nitrogen Generator Skid N2 by “ATLAS COPCO” model HPN2, 11Barg, complete with model GA7+VSD air compressor, NGP10+ nitrogen generator, FX30(E4) air dryer and two Receiver tanks one for N22 and one a...

Stainless Steel Electrically Heated Jacketed Mixing Tank

Stainless Steel Electrically Heated Jacketed Mixing Tank, capacity 150L, internal dimensions 550mm dia x 700mm deep, open top with 1/3 fixed and 2/3 hinged lid, dished bottom with 50mm dia bottom outlet with s/s ...

Packmatic Heat Shrink Tunnel

• Manufacturer: Packmatic

Heat Shrink Tunnel, “Packmatic”, Model 50ST25, 460mm wide x 1000mm long x 250mm high tunnel, adjustable temperature, 3 phase Follow us on: © 2024 Fallsdell Machinery Pty Ltd

Stainless Steel Heating Tanks

Stainless Steel Heating Tanks, 1800L capacity, internal dimensions 1380mm dia x 1200 deep, complete enclosed with 450mm manway and bolted lid, conical bottom with 50mm dia outlet valve, provided with 3 phase 30kw...

Mixquip teralba 240V Slow Speed S/S IBC Mixers

• Manufacturer: Mixquip teralba

S/S IBC Bridge Mount Mixers, “Mixquip Teralba” stainless steel bridge, mixer driven by single phase 2.2kw 200rpm geared motor, 400mm dia folding impeller Follow us on: © 2024 Fallsdell Machinery Pty Ltd

Stainless Steel Jacketed Fermenter Tank

Stainless Steel Jacketed Fermenter Tank, capacity: 5,000L, internal dimension: 1650mm dia x 2250mm deep, provided with stainless steel coil jacketed, dished bottom with 80mm dia centre discharge, inlets/outlets t...

Perfeb Engineering Stainless Steel Jacketed Tank with Liquiverter

• Manufacturer: Perfeb Engineering

Stainless Steel Jacketed Mixing Tank with APV Liquiverter, “Perfeb Engineering”, 1200L capacity, internal dimensions of 1320 mm diameter x 930 mm straight side height x a 300 mm deep conical bottom, fully enclose...

Pneumatic IBC Mixer

Pneumatic IBC Mixer, 880mm long shaft with 2 x 515mm dia stainless steel blades, 1000mm wide stainless steel bridge with forklift lifting arrangement Follow us on: © 2024 Fallsdell Machinery Pty Ltd

Fitzpatrick Fitzmill Hammermill with Auger Feeder

• Manufacturer: Fitzpatrick
• Model: D6A

Fitzmill Hammermill with Auger Feeder, “Fitzpatrick” model D6A, high throughput rates of 200-1,000 kg/hr, auger screw feed system with hopper, 208V three phase, 18A full load Amp, 60Hz, complete with one intercha...

Tronics Overhead Labeller

• Manufacturer: Tronics

Overhead Labeller, “Tronics”, with control panel, single phase, adjustable height, mobile unit, overall dimensions (L x W x H): 1200mm x 850mm x 2000mm Follow us on: © 2024 Fallsdell Machinery Pty Ltd

Tronics Double Sided Labeller

• Manufacturer: Tronics

Double Sided Labeller, “Tronics” Model TDS431CDEH, single phase, with a 190mm wide x 2400mm long slat conveyor, fully adjustable with full controls, stainless steel structure, mobile Follow us on: © 2024 Fallsdel...

Inline Emulsifier

Inline Emulsifier, with a 70mm dia inlet x 50mm dia outlet, driven by 4kw 2850rpm, mounted over stainless steel base Follow us on: © 2024 Fallsdell Machinery Pty Ltd