Used Gear Cutting in Illinois, USA

1995 GLEASON Phoenix 125GH CNC Gear Hobber (1998)

• Manufacturer: Gleason-Pfauter
• Model: Phoenix 125GH

GLEASON 125GH CNC GEAR HOBBER (1998) Max workpiece diameter 4.52" / 125 mm Min workpiece Diameter .25" / 6.4 mm Max Pitch / Module 8 NDP/ 3.2 Module Max Axial slide travel 11.81"/ 300 mm Max Hob Head Swivel -180 ...

Step Pulley

As Is, Where Is Step pulley from old drill press

Step Pulley

Step pulley from old drill press Lot type: Online Auction | Inventory id: 25Feb782

2000 Gleason GP200S

• Manufacturer: Gleason-Pfauter
• Model: GP200S

Nominal Work Piece Diameter 7.9″ / 200 mm Maximum Diametral Pitch/ Module 5 NDP/ 5 Module Maximum Stroke Length (optional) 2.17″ (4.33″) / 55mm (110mm) Maximum Face Width (optional) 2.00″ (4.00″) / 50mm (99mm) Cu...

1970 Gleason No.116

• Manufacturer: Gleason-Pfauter
• Model: NO116

Largest Pitch Diameter, 30 Degree Spiral Angle; Widest Face** *Requires Special Depth Cutter Blades ** Using a 12″ Dia. 20 Blade Cutter and 35 Degree Spiral Angle the Face Width Should Not Exceed 1 3/8″ on Gears ...

1960 Gleason No. 516 Hypoid

• Manufacturer: Gleason-Pfauter

Pinion Spindle Gear Spindle Electrical at 60 Cycle