Used Heat Exchangers in New Jersey, USA

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216127

• new

• Manufacturer: Graham

Flash condenser for a column condenser (IPP # 216020) Duty: 2,957,440 BTU/hr.

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216085

• used

• Manufacturer: Graham

Cooling water lines: two 8" lines. 2 pass design

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 245829

• used

• Manufacturer: Alfa Laval

carbon steel pressure plates and frame,

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 81090

• used

• Manufacturer: Paterson Kelly

304SS plates Max working pressure 100 psi @ 200 deg F

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 233721

• used

• Manufacturer: APV

316 SS plates with CS frame, rated for 199585 lbs./hr. water and 210539 lbs./hr. glycol.

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232711

• used

• Manufacturer: APV /Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Block Heat Exchanger 187.5 m² (2,018 ft²) - IPP# 246426

• used

• Manufacturer: Kapp

Additional Info:

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222358

• used

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

APV HXC

• used

• Manufacturer: APV - Gaulin

18 Sq.Ft. APV Plate Exchanger. 2" inlet/outlet Ft2: 18.0 ft | Tube psig: 100 | Tube mat: SS | Horiz/vert: V | Shell psig: 100 | Shell pass: 1 | Tube pass: 1

APV TR9AVO

• used

• Manufacturer: APV - Gaulin

3900 Sq.Ft. APV model TR9AVO, Plate Heat Exchanger. Stainless Steel plates

ATLAS

• used

• Manufacturer: Atlas

Approx. 2700 Sq.Ft. Carbon Steel U tube heat Exchanger. Approx 30" dia. x 20' lgth. BEU

WYATT

• used

• Manufacturer: Wyatt

Qty. (2) Each: 1170 Sq.Ft. Used shell and tube Kettle type reboiler, heat exchanger. (280) 1" OD x 16' tubes. BKU

XCHANGER INC C-100-2

• used

• Manufacturer: XChanger

Xchanger Inc. heat exchanger used to heat and cool low pressure gas streams. Model C-100-2. Typical pressure 15 PSI (1 Bar). Air In 2", Air Out 2". Tube inlet 3/4", Outlet 1.5". Used to heat/cool/dehumidify by...

AO SMITH

• used

• Manufacturer: A.O. Smith

892 Sq.ft. Shell and Tube heat exchanger.(316) 5/8" OD x 17'4" Tubes. U Tube. High pressure. Tube and shell both rated 2000 PSI @ 650 degF.

Carbon Steel Pfaudler Shell and Tube Heat Exchanger - IPP# 235731

• used

• Manufacturer: Pfaudler