Used Test Generators in Florida, USA

Keysight / Agilent / HP 83630B

• Manufacturer: Agilent - Keysight
• Model: 83630B

+13 dBm calibrated output power -50 dBc harmonics <26.5 GHz typical SSB phase noise <-80 dBc at 10 GHz and 10 kHz offset Complete analog sweeper 1 Hz frequency resolution (Option 008) Pulse, amplitude and frequen...

Keysight / Agilent / HP 83640B

• Manufacturer: Agilent - Keysight
• Model: 83640B

+10 dBm calibrated output power -50 dBc harmonics <26.5 GHz typical SSB phase noise <-80 dBc at 10 GHz and 10 kHz offset Complete analog sweeper 1 Hz frequency resolution (Option 008) Pulse, amplitude and frequen...

Anritsu MG3631A

• Manufacturer: Anritsu
• Model: MG3631A

Minimum Frequency 0.1 MHz Maximum Frequency 1040 MHz Frequency Resolution 10 Hz Time base stability 0.0000002 /day Frequency Switching Time 150 ms Minimum Output Power -143 dBm Maximum Output Power 13 dBm Power R...

Kenwood FG-273A

• Manufacturer: Kenwood
• Model: FG-273A

Wide frequency rangeFrom an extreme low frequency up through above audible band of7 ranges (FG-275 0.5Hz to 5MHz, FG-273A 0.2Hz to 2MHz) Various output wave formsIn addition to sine wave, triangle wave, square wa...

Sencore NG1502

• Manufacturer: Sencore
• Model: NG1502

Flat, broadband RF noise source ranging from 5 MHz to 2,150 MHz Inspect the frequency response characteristics of an RF system (CATV, MATV, telemetry etc.) Analyze the frequency response of RF amps Align RF band-...

Wiltron 6640A

• Manufacturer: Wiltron
• Model: 6640A

Internally leveled Maximum Output is >1 mW. Various sweep modes are possible. For example full sweep, sweeps from F1 to F2, sweeps from marker 1 to marker 2 and Delta-F. CW operation as well. Frequency resolution...

Keysight / Agilent / HP 8662A

• Manufacturer: Agilent - Keysight
• Model: 8662A

< -147 dBc/Hz SSB phase noise at 10 kHz offset 0.1 Hz frequency resolution Internal variable modulation oscillator Optional MATE capability Minimum Single-Side-Band Noise -148 dBc/Hz Maximum Single-Side-Band Nois...

Keysight / Agilent / HP 3310B

• Manufacturer: Agilent - Keysight
• Model: 3310B

The Agilent 3310B has all the features of the standard 3310A plus single and multiple cycle output capability. Start/Stop Phase can be adjusted over a range of approximately ±90º. A fast rise time sync output is ...

Acterna SG 1000

• Manufacturer: JDSU - Viavi - Acterna

Highly-stable reference frequency (OCXO) AM, FM, PhM and Pulse modulation Ultra-fast frequency switching time (15 µs model only) High-speed digital sweep (15 µs model only Frequency-hopping programs (15 µs model ...

Keysight / Agilent / HP E4428C-506

• Manufacturer: Agilent - Keysight
• Model: E4428C-506

Covers the entire cellular, ISM (2.4 & 5.8 GHz), and UNII frequency bands Stand high stability OCXO time base reference reduces frequency drift resulting in improved frequency accuracy Excellent standard phase n...

Keysight / Agilent / HP 81133A

• Manufacturer: Agilent - Keysight
• Model: 81133A

Frequency range from 15 MHz - 3.35 GHz Single output channel Low jitter Fast rise times (20%-80%) < 60 ps Delay modulation (jitter emulation) Variable cross-over point LVDS applications can be addressed with outp...

GW Instek GFG-813

• Manufacturer: GW Instek
• Model: GFG-813

6 digit counter with Ext function GCV output for synchronization 3 step (-20dB, -40dB, -60dB) and Variable Attenuator VCG for 1000:1 EXT freq. ctrl. Output overload protection 0.3-in LED display Ext. Sensitivity:...

PNG7107A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...

Wavetek 98

• Manufacturer: Wavetek
• Model: 98

Low-Distortion Synthesized Oscillator Direct Digital Synthesis Sine Wave Generation n < 0.02% THD typical 1 uHz to 1.1 MHz frequency range 8 digits of frequency resolution 7 Frequency Sweep Modes 15 mVp-p to 30 V...

PNG7112A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...