Used Heat Exchangers in New Jersey, USA

Shell and Tube Heat Exchanger 4 m² (43.1 ft²) Graphite - IPP# 200836

• used

• Manufacturer: GAB Neumann

4.0 square meter ( 43 square foot) Vertical graphite heat exchanger TUV certified

Stainless Steel 316 Hebeler Corp Plate and Frame Heat Exchanger - IPP# 210848

• used

• Manufacturer: Hebeler Corp

316 SS plate, CS frame, Plate and Frame Heat Exchanger for APV Crepaco Minimum -20 degrees F @ 225 PSI 150 psi flange set.

Graphite Robert Jenkins GEK-BQ-7 Block Heat Exchanger - IPP# 705658

• used

• Manufacturer: Jenkins

cubic block heat exchanger process side is 2-pass with (2160) slots, 9.5mm x 3mm, service side is multi-stage with (756) 9.5mm diameter tubes can be used vertical or horizontal.

Shell and Tube Heat Exchanger 120.7 m² (1,299 ft²) Inconel - IPP# 99497

• used

• Manufacturer: Schulz (Germany)

Incoloy 625 vert tube and shell heat exchanger Mfd by W Schulz/Krefeld Tubes, tubesheet and heads made of 2.4856 (NiCrMo9Nb) Tube pitch: 60 deg triangular pitch @ 32mm distance Single pass design.

Shell and Tube Heat Exchanger 23.3 m² (250.8 ft²) Graphite - IPP# 204133

• used

• Manufacturer: VICARB

condenser

Shell and Tube Heat Exchanger 110 m² (1,184 ft²) Graphite - IPP# 73439

• new

• Manufacturer: Chemiekombinat Bitterfeld (Germany)

Shell and Tube Heat Exchanger 89 m² (958 ft²) Graphite - IPP# 87148

• used

• Manufacturer: Kearney

Shell and Tube Heat Exchanger 13 m² (140 ft²) Graphite - IPP# 30640

• used

• Manufacturer: Kearney

Shell and Tube Heat Exchanger 7 m² (75.3 ft²) Graphite - IPP# 204146

• used

• Manufacturer: VICARB

condenser

Shell and Tube Heat Exchanger 1.75 m² (18.8 ft²) Graphite - IPP# 204141

• used

• Manufacturer: VICARB

condenser

Shell and Tube Heat Exchanger 6.4 m² (68.9 ft²) Graphite - IPP# 204115

• used

• Manufacturer: VICARB

condenser

Stainless Steel 304 Western Supply Shell and Tube Heat Exchanger - IPP# 221039

• used

• Manufacturer: Western Supply

4,690,000 BTU/Hr

Monel ITT Standard BSM 12x120 Shell and Tube Heat Exchanger - IPP# 206262

• used

• Manufacturer: ITT

Monel 400 Heads/ Monel Tubes No heads with unit, requires direct piping or (2 )bolted heads.

Shell and Tube Heat Exchanger 1.39 m² (15 ft²) Graphite - IPP# 89413

• used

• Manufacturer: Graphite Apparatebau

Designed to German TUV standards. Tubes rated 88 psi/full vac (6 bar/full vac); shell rated 88 psi @ -30 deg F/329 deg F (6 bar @ -30 deg C/+165 deg C).

Shell and Tube Heat Exchanger 16 m² (172.2 ft²) Inconel - IPP# 236040

• used

• Manufacturer: Enco

Tube Type:Incolloy 686 TUV design pressure tubeside -1/1 bar @ 200 degrees C (480 liter) shell -1/13 bar @ 200 degrees C (290 liter) 4mm thick Incolloy 686 (2.4606) shell (2) Incolloy 686 (2.4606) dished heads