Used Processing in Hamburg, Germany

2011 Montresor Lola 1000 8+6 DX-
- used
- Manufacturer: Montresor
- Model: Lola 1000
Edge polishing machine Belt running direction: RIGHT to LEFT 8 face grinding supports 130 & 150 mm with vertical oscillation 3 upper / 3 lower chamfering supports, first chamfering support at the bottom Diamond c...
Hamburg, Germany
2020 Omag Area Cut-
- used
- Manufacturer: Omag
5-axis CNC bridge saw with 5-axis head 100 hours of operation (as new) Siemens CNC control Vacuum suction cups for separating workpieces on the head R 1/2" connection in the motor shaft Max. saw blade 750 mm 18.5...
Hamburg, Germany
2017 INTERMAC Master 45-
- used
- Manufacturer: Intermac
- Model: Master 45
5-Axis CNC Machining Center Operating Hours: 3,568 Maximum Dimensions: 4,060 x 2,300 mm PC-controlled 5-axis machining center for milling, drilling, grinding, polishing, beveling, and engraving marble, stone, and...
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX-
- used
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany
2020 Montresor Faster 64 Plus-
- used
- Manufacturer: Montresor
Fully equipped edge grinding machine, only put into operation in 2022 Working hours 1175 hours Linear meters 16203 m Year of construction 2020 (in operation 2022) 8 horizontal polishing heads 2 surface calibrator...
Hamburg, Germany
2008 GMM Egil 36-
- refurbished
- Manufacturer: GMM
- Model: Egil 36
Bridge saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. Maximum horizontal stroke (X-axis) 3600 mm Maximum horizontal bridge stroke (Y-axis) 2250 mm Maximum ve...
Hamburg, Germany
1998 SIMEC LM2000/212
- used
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
1998 Pellegrini DF2000-
- used
- Manufacturer: Pellegrini
- Model: DF2000
Wire saw for marble and granite. Dimensions: 10 x 1.5 x h6 m Maximum block size: 4.1 x 2.2 m Diamond wire length: 19.70/21.70 m Diamond wire speed: 0-40 m/s More used machines at: www.janssen-usedmachines.com New...
Hamburg, Germany
GMM Lexta 36 full-
- refurbished
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw for granite - Refurbished with 6 months warranty. Installation and training can be carried out at an extra cost. Maximum horizontal stroke of the saw 3600 mm Maximum vertical stroke of the saw 420 mm M...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- used
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- used
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany
2020 GMM Lexta 36 FULL
- refurbished
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw Completely overhauled in 2020 New PLC and state-of-the-art software installed Rated power: 22 kW Vertical disc diameter: 825 mm Vertical disc stroke: 420 mm Maximum cutting depth: 305 mm Tiltable verti...
Hamburg, Germany
2008 Donatoni Quadrix
- used
- Manufacturer: Donatoni
- Model: Quadrix
Bridge saw with 3 axes Tilting table Z-axis 450 mm C-axis degrees -5° / +365° A-axis, degrees 0° / 90° 2000 x 3520 working area 2400 x 3800 (with Move system) Maximum diameter of the saw blade 625 mm Electric mot...
Hamburg, Germany
Sasso Flat 84-
- used
- Manufacturer: Sasso
- Model: Flat
Edge grinding machine a new belt new guide rollers new pressure rollers new bearings for the belt pulleys calibration 8 polishing heads 2 heads for the upper edge 2 heads for the lower edge underfloor saw for wor...
Hamburg, Germany
1999 GMM Radia full-
- refurbished
- Manufacturer: GMM
- Model: Radia
Bridge saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. Maximum horizontal stroke 3800 mm Maximum vertical stroke 700 mm Maximum bridge travel 4300 mm Maximum ...
Hamburg, Germany