Used Agitators, Blenders, Mixers in Japan

Ribbon Blender

Main motor 11Kw, discharge motor 0.75Kw (reduction ratio 1/29) Capacity approx. 1500L

SUS tank with agitator

250L φ710×H640(Body)×H750(Leg) Remarks: Ancillary product for 6931 Pressure Cake Mixer

Ribbon Blender 4000L

Total capacity: 4000L Discharge: Bottom slide damper With SS jacket Main unit only, without board

［Satake] Agitator Model No

• Manufacturer: Satake

Shaft and blade material: SUS. Three propellers x 1. Rotation speed: 360 rpm. Base with casters/manual elevation type.

［Kajiwara] Mixer No model

• Manufacturer: Kanajiwara

Purchasing area: 60Hz | Material: Wetted part SUS304 | Quantity saved: 1

V Type Mixer

Where to use: Chemical factory Food factory Feed and fertilizer factory | Whole picture: 150L, approx. 80L SUS

［Ikeda Rika] V type mixer No model

• Manufacturer: Ikeda

Capacity: about 10L With agitator Power: 0.2kw/100V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One

［Mitsui Miike (now Nippon Coke)] Cooler mixer No model

• Manufacturer: Mitsui Seiki

1000L Remarks. If serviced. It will be clean, please don't worry.

［Special Kikka] Homo-Mixer Model No

• Manufacturer: Daiichi Bussan Co.

500 to 2000rpm Power: 200w/100V | Material: Wetted part SUS | Quantity saved: One

Meiwa Industry OM-130

• Manufacturer: Meiwa

Total capacity 130L. Cage rotation speed 11/13rpm(50Hz/60Hz). 1.5Kw200V. Vessel rotation speed 22/26rpm (50Hz/60Hz). 0.4Kw 200V. The mixing layer rotates both vertically and horizontally to increase mixing power.

2007 Buhler SDV 1100

• Manufacturer: ビューラー

Chilled roll Effective dimensions of roll: φ400×1100 Motor: 45kw Weight: 4.2 tons With board We were able to check the operation of each part individually, but the operation check using the board shows only roll ...

1990 Hosokawa Micron DBX-1000RMW

• Manufacturer: ホソカワミクロン

Mixing capacity 1000L Motor: 3.7Kw for rotation (explosion-proof) / 0.4Kw for revolution (explosion-proof) Rotation speed: 55RPM for rotation/ 1.6RPM for revolution Design withstand pressure: FV Jacket: 1.9Kg/cm²...

Aikosha Manufacturing AM-90

• Manufacturer: Aikosha Manufacturing Co.

With ON/OFF switch & timer. Spare blades available.

Kawata SFC-50

• Manufacturer: Kawata

High-precision mixing by three-dimensional motion (vibration + agitation) Remarks Blades: missing.

2005 Buhler SHP · TS · 40

• Manufacturer: Bühler

Wetted parts material: SUS Hydraulic drive motor Agitator: High-speed turbine, low-speed 3 open propellers Explosion-proof hydraulic unit