Used Agitators, Blenders, Mixers in Saxony, Germany

Stainless steel tank 6500 L with agitator mixing tank insulated #26040

Tank dimensions height 2.50 m, Ø 1.90 m capacity approx. 6.500 l Mixing tank stainless steel tank with agitator , tank dimensions height 2.50 m, Ø 1.90 m mixing unit 4.0 kW / 43 rpm for molasses, beverages, AHL, ...

Gear motor 5.5 kW 307 rpm Tank dissolver agitator #B17402

Gear motor tank mixer, agitator Flat geared motor Flange geared motor Angular gear unit Agitator motor Agitator drive unused NORD gear unit construction 5.5 kW 307 rpm 380/660 V IP55 Hollow shaft: Ø approx. 50 mm...

Gear motor 5.5 kW 307 rpm Dissolver agitator #B17404

Geared motor with dissolver Agitator Parallel shaft geared motor Flange geared motor Angular gear unit Agitator motor Agitator drive unused NORD gear unit construction 5.5 kW 307 rpm 380/660 V IP55 Hollow shaft: ...

Gear motor 5.5 kW 307 rpm dissolver agitator #B17403

Geared motor with dissolver Agitator Parallel shaft geared motor Flange geared motor Angular gear unit Agitator motor Agitator drive unused NORD gear unit construction 5.5 kW 307 rpm 380/660 V IP55 Hollow shaft: ...

Single-shaft paddle mixer #B16519

Mixing plant Dimensions 330 x 160 x 200 cm + Gear motor Single-shaft paddle mixer Overall dimensions 3.5 m x 1.6 m x 2 m Mixing tank 3 m long x 1.6 m diameter Total volume approx. 6 m³ With hollow shaft gear moto...

1999 Continuous mixer 55 kW #B17062

• Manufacturer: AVA-HUEP GmbH

Continuous mixer, single-shaft mixer, trough mixer for heavy-duty mixers used ideally suited for large throughput quantities Manufacturer AVA-HUEP GmbH capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm ...

Pendraulic dissolver

Dissolver, mixing unit, agitator, with mixing vessel PENDRAULIC WDV 7.5 Length ( stirrer ): 1000 mm, diameter ( stirrer ): Ø 200 mm Material ( stirrer ): Stainless steel Gearbox: STÖBER R67-0000-NK 360 - 1800 rpm...

Trough mixer 1.5 kW stainless steel #B16692

Trough approx. 1500 x 850 x 1100 mm 1.5 kW 5.3 rpm Single-shaft mixer, trough mixer, stainless steel, used Manufacturer unknown Stainless steel Bottom is closed with a slide valve (this has yet to be manufactured...

Paddle mixer stainless steel approx. 2800 mm #B17253

Mixer stainless steel, mixing auger, auger mixer, paddle mixer used Inlet approx. 700 x 320 mm stainless steel A motor can be retrofitted by us according to your requirements.

Degrease Station

Item Description/Artikelbeschreibung: Lot consists of: (1) Degrease Station Position besteht aus: (1) Entfettungsstation Technical Details/Technische Details: English: 1000 x 600mm, mobile Further Information/Wei...

STAMO / Getriebebau NORD DEx 160L/4K

• Manufacturer: Getriebebau-NORD

Agitator gear motor n2: 16 rpm / M2: 8923 Nm Motor: Manufacturer: HEW hollow shaft Ø 100 mm, with feather key 15 kW / 1465 rpm Ex-protected / IP 55 / 380 V Subject to changes and errors in technical data, specifi...

Dosing hopper Ø 1200 mm #B15008

• Manufacturer: K-TRON SODER

Dosing hopper, weighing hopper used for K-TRON screw feeder stainless steel cone diameter max approx. 1200 mm min approx. 300 mm height approx. 2700 mm volume approx. 2 m³ stirrer drive 0,55 kw

KLOSE KDR 308-20

• Manufacturer: KLOSE

Roller drive, motorized roller, feed drive, roller gear used roll width ca. 380 mm roll diameter approx. 150 mm 300 rpm torque = 2,8 kpm 500 V 50 Hz Total approx. 1250 x 350 x 350 mm The roller drives come from a...

Stainless steel paddle auger mixing auger adjustable 2.5 m #B14878

Paddle screw, mixing screw, washing screw, trough screw used Paddle screw, mixing screw, washing screw, trough screw, friction washer used trough length approx. 2500 mm trough width approx. 530 mm trough height a...

Une paddle snail #23421

combined trough/tubular auger with paddle and threaded part and sight flaps , unused total length 5800 mm trough length with paddles 4000 mm trough width (inside) 430 mm pipe length with thread on outlet side 100...