Used Agitators in Germany

850 liter insulated agitator tank, Aisi 304 with propeller agitator

notice: some residues of previous content, bump at the insulation jacket remarks: Tank on frame rest made of Fe; Fastening of the manhole cover incomplete agitator features: Agitator motor with signs of corrosion...

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

14000 liter insulated agitator tank, Aisi 304 with blades agitator

remarks: Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm...

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

5000 liter heat-/coolable agitator tank, Aisi 316 with 2 agitators

max. allowable working overpressure (dj): 4.0 bar Temperature control cylinder (dj): half-coil remarks: Heating coil outside around the lower cylinder area; 3 of the feet are equipped with load cells (no guarante...

THOUET agitator tank - type RW-3000, with a capacity of approx. 3,000 kg.

• Manufacturer: Thouet

The tank is double-walled for heating in mild steel. The hot water is provided by the installed screw-in heaters. Useful capacity: approx. 3,000 kg

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

1000 Liter insulated agitator tank, Aisi 316 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working temperature: 90 °C remarks: Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket)

15000 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen

3500 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket notice: some residues of previous content, bump at the insulation jacket remarks: Smaller dents on feet and outlet; ...

630 liter insulated agitator tank, Aisi 304 with propeller agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions)

67000 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: BERTSCH

max. allowable working temperature: 100 °C remarks: Manhole cylinder NW 600; total height might deviate slightly (measures taken from drawing)

810 liter agitator tank, Aisi 304 with jet stream agitator

Volume: 810 liter | Lower bottom: flat bottom | Upper bottom: geschweißter Deckel mit Klappsegment | Stand type: legs height adjustable | Quantity legs: 3 Piece | Diameter inside: 990 mm | Cylindrical height: 1....

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...