Building Filters
- Trusted Seller
Pfalzgrafenweiler, Germany - Trusted Seller
1998 Agitator
- Manufacturer: Grob AG
Agitator The agitator blades have a diameter of approx. 92cm. It is approx. 84cm long. The frame with the motor is 110cm long and 23cm wide. The bridge is 22cm high, total height including motor cover is approx. ...
Erfurt, Germany - Trusted Seller
Stainless steel container 0.76 cbm
- Manufacturer: Sielmann
Dimensions: 800 mm diameter, 1,400 mm cylinder height, 107 mm upper base, 231 mm lower base, 850 mm agitator height, 400 mm ground clearance, 2,988 mm approx. total height. Design: Cylinder standing on 3 feet, wi...
Bremen, Germany 
Agitator tank for various - 90381
- Manufacturer: Nagema
Capacity 160 l, Stainless steel construction, with lid Electric heater with temperature controller (30 to 80°C) With 95°C limiter, Drain valve. With electrical cabinet and START-STOP motor With propeller agitator...
Willich, Germany
Dissolving agitator for various - 90522
- Manufacturer: Eser Makine San. Ltd Sti
For fats, chocolate, etc. For keeping warm and mixing Capacity 200 L, stainless steel, with lid and safety switch, Double-walled, with thermal insulation, with built-in 3 kW heater, water circulation pump, Digita...
Willich, Germany- Trusted Seller
Stainless steel container 3.6 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 height-adjustable feet with curved bases. Inclined blade agitator eccentric from above, 0.5/2.2 kW, 240/480 rpm (single-blade for one tank, double-blade for one tank). Insulated...
Bremen, Germany - Trusted Seller
Stainless steel container 0.05 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator propeller, 0.18/0.23 kW, 650/1390 rpm, outlet 2 outlets DN 25, side of the cylinder at ...
Bremen, Germany - Trusted Seller
Stainless steel container 25 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 feet, with bracing, with conical bottoms, paddle agitator from the top centered at 2.8/12.54 rpm, air insulation around the cylinder and lower base, welded stainless steel cover...
Bremen, Germany - Trusted Seller
Stainless steel container 28 cbm
- Manufacturer: Sielmann
Design: cylindrical, upright with lower flat bottom, with 100 mm gradient to the outlet, concrete-supported, with upper conical bottom, propeller agitator installed diagonally in the cylinder, 2.5 kW, 930 rpm, in...
Bremen, Germany - Trusted Seller
Stainless steel container 10 cbm
- Manufacturer: Sielmann
Design: cylindrical, lying on 6 feet, height-adjustable, with conical bottoms, propeller agitator on the upper crest line, approx. 1 kW, approx. 940 rpm. Connections: 1 Kiel manhole 600 x 800 mm on the upper cres...
Bremen, Germany - Trusted Seller
Stainless steel container 50 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on a frame, with concrete support, with upper conical base and lower eccentric conical base. Insulation around the cylinder and upper base, welded stainless steel cover. Connections:...
Bremen, Germany - Trusted Seller
Stainless steel container 50 cbm
- Manufacturer: Sielmann
Design: cylindrical, upright with lower inwardly curved conical base, concrete base and upper conical base. Propeller agitator installed diagonally in the cylinder below, 2.5 kW, 930 rpm. Insulation around the cy...
Bremen, Germany - Trusted Seller
Stainless steel container 30 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms. Propeller agitator installed diagonally below the cylinder. Insulation around the cylinder and lower bottom, cover fully welded. C...
Bremen, Germany - Trusted Seller
Stainless steel container 75 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on 8 feet, height-adjustable, with conical bottoms. Propeller agitator installed diagonally in the cylinder below, 8 kW, 960 rpm (supplied loose). Insulation around the cylinder and ...
Bremen, Germany - Trusted Seller
Stainless steel container 0.05 cbm
- Manufacturer: Sielmann
Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.37 kW, 1380 rpm, outlet Ø 15 bottom center
Bremen, Germany