Processing » Agitators, Blenders, Mixers » Agitators » Bremen

Building Filters

367

Used Agitators in Bremen, Germany

  • Trusted Seller
    Stainless steel container 30 cbm

    Stainless steel container 30 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms. Propeller agitator installed diagonally below the cylinder. Insulation around the cylinder and lower bottom, cover fully welded. C...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 75 cbm

    Stainless steel container 75 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 8 feet, height-adjustable, with conical bottoms. Propeller agitator installed diagonally in the cylinder below, 8 kW, 960 rpm (supplied loose). Insulation around the cylinder and ...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 0.05 cbm

    Stainless steel container 0.05 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.37 kW, 1380 rpm, outlet Ø 15 bottom center

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 15 cbm

    Stainless steel container 15 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 3 feet, height-adjustable, with conical bottoms, with anchor agitator centered from above, approx. 1.5 kW, approx. 25 rpm. Double jacket on the cylinder below for pressureless hea...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 240 cbm

    Stainless steel container 240 cbm

    • Manufacturer: Sielmann

    Design: Upright cylinder with inwardly curved lower base, sloped to the outlet. With a conical upper base. Propeller agitator installed at an angle in the cylinder below, 2.7 kW, 465/970 rpm. Insulation around th...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 36.9 cbm

    Stainless steel container 36.9 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 4 feet, height-adjustable, with conical bases, anchor agitator eccentric from above, 5.5 kW, 30 rpm, screws removed for transport, half-pipe coil around cylinder and lower base, 3...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 30 cbm

    Stainless steel container 30 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 4 feet, height-adjustable, with conical bottoms, propeller agitator installed diagonally below the cylinder - motor defective - Connections: 1 hinged lid dome Ø 430 in the upper b...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container, 8 cbm

    Stainless steel container, 8 cbm

    • Manufacturer: Sielmann

    Operating data: 0.4 bar operating pressure, 100 °C operating temperature according to nameplate. Design: cylindrical, standing on 4 feet, height adjustable, with conical bottoms, inclined blade agitator eccentric...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 3 cbm

    Stainless steel container 3 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 3 feet, height-adjustable, with conical bases, Z-stirrer eccentric from above, 0.3/0.6 kW/14/28 rpm, heating/cooling pockets on the cylinder and lower base, designed for 4 bar ope...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 30 cbm

    Stainless steel container 30 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 4 feet, height adjustable, with conical bottoms, Z-stirrer eccentric from above, 11 kW, 33 rpm, with bottom bearing, 2 baffles, half-pipe coil on the cylinder, pillow plates on th...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 10 cbm

    Stainless steel container 10 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 3 feet, height-adjustable, with conical bases, Z-stirrer eccentric from above, 1.2/2.0 kW, 16/32 rpm, heating/cooling pockets on the cylinder and pillow plates on the lower base, ...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 10 cbm

    Stainless steel container 10 cbm

    • Manufacturer: Sielmann

    Operating data: 0.9 bar operating pressure Operating temperature 100 °C (Lt. Nameplate) Design: cylindrical, standing on 3 feet, height-adjustable With conical bottoms Z-stirrer eccentric from above, 1.8/2.7 kW, ...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 100 cbm

    Stainless steel container 100 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on a flat base, inside with a lower conical base and an upper conical base. Propeller agitator installed diagonally in the cylinder below. 5.0 kW, 960 rpm. Insulation around the cyli...

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 0.03 cbm

    Stainless steel container 0.03 cbm

    • Manufacturer: Sielmann

    Design: cylindrical, standing on 3 feet, open at the top, with spray ring line, with lower conical bottom, clamp-on agitator disc, 0.25 kW, 1390 rpm, outlet Ø 15 bottom center

    Bremen, Germany
  • Trusted Seller
    Stainless steel container 5 cbm

    Stainless steel container 5 cbm

    • Manufacturer: Sielmann

    Design: Cylinder, standing on 4 feet, height-adjustable, with bracing, with curved bases. Insulation around the cylinder is 1,250 mm high, 80 mm thick, with a bolted aluminum cover. Designed for a working pressur...

    Bremen, Germany
2122232425

Overview

Agitators are essential devices used to stir or mix fluids in various industrial processes. They are commonly found in industries such as chemical, food and beverage, pharmaceuticals, and wastewater treatment. Agitators ensure uniform mixing, improve chemical reactions, and maintain product consistency. They come in different types, including top-entry, side-entry, and bottom-entry agitators, each suited for specific applications.

FAQ

What factors should I consider when purchasing an agitator?

Consider the type of fluid, the viscosity, the required mixing intensity, and the specific application. It's also important to assess the agitator's material compatibility with the fluids being mixed.

How can I ensure the agitator is shipped safely?

Choose a shipping provider experienced in handling industrial equipment. Ensure the agitator is properly packaged and secured to prevent any damage during transit.

What is the typical maintenance schedule for an agitator?

Regular maintenance includes inspecting seals and bearings, checking for wear or damage, and ensuring that all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance procedures.